Cost to Kitchen Demolition in Seattle, WA
$1,280–$5,120 in Seattle
28% above the national average · 1.28x cost multiplier
In Seattle, a kitchen demolition runs $1,280 to $5,120 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Seattle
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $5 | $13 | $23 |
| Materials | $64 | $128 | $256 |
| Labor | $768 | $2,304 | $4,480 |
| Permits | $0 | $192 | $384 |
| Total | $832+28% vs. national avg | $2,624+28% vs. national avg | $5,120+28% vs. national avg |
Budget
Basic demo of upper and lower cabinets, countertops, and flooring in a small kitchen (under 100 sq ft). No load-bearing walls, no asbestos abatement, homeowner handles haul-away.
Mid-Range
Full demo of a 150-200 sq ft kitchen including cabinets, tile backsplash, flooring, soffit removal, and contractor haul-away. Plumbing and electrical disconnection included.
Premium
Comprehensive demo in a 250+ sq ft kitchen, includes partial wall removal (non-load-bearing), asbestos testing and abatement if needed, full haul-away, and surface protection for adjacent areas.
Material Options
Material prices below are national averages; availability in Seattle may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Cabinet removal (stock cabinets) | $300-$700 per set | Standard box cabinets installed in the past 20 yearsRelatively fast, cabinets can sometimes be donated to Habitat for Humanity ReStore |
| Tile flooring removal | $2-$8 per sq ft | Full kitchen remodels replacing the floor system entirelyNecessary before new flooring installation |
| Countertop removal | $100-$400 per section | Remodels replacing all counters; prep for plumbing workGranite and quartz slabs can sometimes be resold ($50-$200 for intact pieces) |
| Drywall removal | $1-$3 per sq ft | Full gut remodels, older homes needing electrical or plumbing updatesExposes wiring, plumbing, and insulation for inspection and upgrade |
| Asbestos abatement (vinyl tile or texture) | $5-$15 per sq ft | Pre-1980 homes with original flooring or drywall compoundRequired by law if positive test; ensures safe conditions for remaining work |
Other Projects in Seattle
Seattle Estimate
Typical Range
$1,280–$5,120
vs. National Average
28% above national
Cost Multiplier
1.28x
Cost Per sq ft
$5–$23
Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →