Cost to Dryer Vent Cleaning in Seattle, WA
$115–$237 in Seattle
28% above the national average · 1.28x cost multiplier
In Seattle, a dryer vent cleaning runs $115 to $237 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Seattle
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per cleaning | $90 | $166 | $576 |
| Materials | $0 | $26 | $192 |
| Labor | $115 | $166 | $320 |
| Permits | $0 | $0 | $0 |
| Total | $115+28% vs. national avg | $192+28% vs. national avg | $512+28% vs. national avg |
Budget
Standard dryer vent cleaning, accessible vent, under 10 feet, interior wall-to-exterior exit, no obstructions. Technician uses a rotary brush and vacuum. In and out in 30-45 minutes.
Mid-Range
Cleaning plus inspection, 10-25 foot vent run with one or two bends, includes camera inspection report. Materials cover any minor duct tape or foil connector repairs made on the spot.
Premium
Long or complex vent run (25+ ft, multiple bends), roof exit, bird nest or severe lint blockage removal, vent reroute or reconnection. Materials include new duct sections, bird guard, and connectors.
Material Options
Material prices below are national averages; availability in Seattle may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard Cleaning Service (Labor Only) | $70-$130 flat rate | Annual maintenance cleanings on short, accessible vents with a wall exitCovers most standard vent runs under 15 feet; no materials cost; quickest service |
| Camera Inspection Add-On | $40-$75 add-on | Vents running through walls or attic space, older homes, or any vent with a history of slow-drying issuesConfirms vent is fully clear; identifies disconnected sections, crushed duct, or damper failures behind walls |
| Vent Rerouting or Duct Replacement | $150-$350 depending on scope | Vents exceeding 35-foot code limit, those with 4+ bends, or damaged flexible duct sectionsCorrects oversized duct length, eliminates unnecessary bends, brings vent up to current code |
| Bird or Rodent Guard Installation | $25-$60 installed | Any exterior exit that has had a bird or rodent nest, or any roof exitPrevents future nest blockages; improves damper function; one-time cost with long service life |
Other Projects in Seattle
Seattle Estimate
Typical Range
$115–$237
vs. National Average
28% above national
Cost Multiplier
1.28x
Cost Per cleaning
$90–$576
Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →