Cost to Hardwood Floor Refinishing in Seattle, WA

$1,280–$4,480 in Seattle

28% above the national average · 1.28x cost multiplier

In Seattle, a hardwood floor refinishing runs $1,280 to $4,480 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Seattle

Line Item	Low	Mid	High
Cost per sq ft	$4	$6	$10
Materials	$192	$384	$768
Labor	$717	$1,728	$3,328
Permits	$0	$0	$0
Total	$909+28% vs. national avg	$2,112+28% vs. national avg	$4,096+28% vs. national avg

Budget

Screen-and-recoat (no sanding) on a 200 sq ft room in good condition. This refreshes the finish without removing wood material.

Mid-Range

Full sand-and-refinish on 400 sq ft (living room and hallway), three coats of oil-modified polyurethane, minor board repairs included.

Premium

Full refinish on 600 sq ft, custom stain color, oil-based finish with five coats, hand-scraping or custom sheen, board replacement for damaged sections.

Material Options

Material prices below are national averages; availability in Seattle may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Oil-Modified Polyurethane	$40-$70 per gallon	Amber warmth enhances wood grain, extremely durable, lower cost, most common choice	Strong VOC fumes require ventilation and 24-hour dry time per coat, yellows over time	Living rooms, dining rooms, high-traffic areas where durability mattersAmber warmth enhances wood grain, extremely durable, lower cost, most common choice
Water-Based Polyurethane	$50-$90 per gallon	Low odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application	Less durable than oil-based, needs more coats, higher material cost	Bedrooms, condos where fumes are a problem, light-colored wood species where clarity mattersLow odor, dries in 2-4 hours per coat, crystal clear (no yellowing), stays in home during application
Hardwax Oil	$60-$100 per gallon	Penetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish	Less protective than polyurethane, requires annual maintenance oil application, expensive	Wide-plank floors, rustic aesthetics, homeowners willing to do regular maintenancePenetrates wood rather than sitting on top, natural matte look, easier spot repair without full refinish
Acid-Cured Swedish Finish	$80-$120 per gallon	Extremely hard and durable, excellent for high-traffic commercial and residential use	Very strong fumes (must vacate for 3-5 days), requires professional application only, limited DIY option	Busy family homes, dogs, high-traffic main floors where maximum durability is the priorityExtremely hard and durable, excellent for high-traffic commercial and residential use

Other Projects in Seattle

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Hardwood Floor Refinishing

Seattle Estimate

Typical Range

$1,280–$4,480

vs. National Average

28% above national

Cost Multiplier

1.28x

Cost Per sq ft

$4–$10

Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →