Cost to Stucco Repair in Seattle, WA

$384–$3,840 in Seattle

28% above the national average · 1.28x cost multiplier

In Seattle, a stucco repair runs $384 to $3,840 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Seattle

Line Item	Low	Mid	High
Cost per sq ft	$10	$28	$64
Materials	$77	$448	$1,152
Labor	$243	$1,088	$3,328
Permits	$0	$0	$0
Total	$320+28% vs. national avg	$1,536+28% vs. national avg	$4,480+28% vs. national avg

Budget

Hairline crack repair or small patch under 10 sq ft. Pre-mixed patching compound, no texture matching required.

Mid-Range

Section replacement up to 50 sq ft with texture matching. Includes base coat, finish coat, and texture blending to match existing wall.

Premium

Large section or full wall repair over 100 sq ft. Full 3-coat stucco system or EIFS repair, color-matched finish coat, water damage remediation.

Material Options

Material prices below are national averages; availability in Seattle may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Pre-Mixed Stucco Patch Compound	$20-$50 per bucket (covers ~10-20 sq ft)	Easiest to apply, available at big-box stores, one-step process for small repairs	Difficult to texture match, not suitable for repairs over 10 sq ft, may crack if applied too thick	DIY hairline crack fill and small cosmetic patches under 5 sq ftEasiest to apply, available at big-box stores, one-step process for small repairs
Traditional 3-Coat Stucco System	$8-$18 per sq ft installed	Most durable long-term repair, matches original construction on older homes, breathable system that resists moisture buildup	Labor-intensive three-step process with cure time between coats, requires skilled plasterer to texture match	Any repair over 20 sq ft on traditionally stuccoed homes, structural crack repairsMost durable long-term repair, matches original construction on older homes, breathable system that resists moisture buildup
EIFS / Synthetic Stucco	$15-$30 per sq ft installed	Adds insulation value, seamless with existing EIFS systems when matched correctly, flexible finish coat resists hairline cracking	Must match original manufacturer's system, moisture can get trapped if not properly detailed at seams	Repairing existing EIFS systems installed after the 1980s; requires contractor with EIFS certificationAdds insulation value, seamless with existing EIFS systems when matched correctly, flexible finish coat resists hairline cracking
Elastomeric Coating	$1.50-$3.50 per sq ft	Bridges hairline cracks, waterproofs the entire surface, extends life of aging stucco without full replacement	Does not fix structural issues underneath, adds visible sheen if not tinted correctly, traps moisture if existing damage is not first repaired	Aging stucco with widespread hairline cracking where full replacement isn't in the budgetBridges hairline cracks, waterproofs the entire surface, extends life of aging stucco without full replacement

Other Projects in Seattle

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Stucco Repair

Seattle Estimate

Typical Range

$384–$3,840

vs. National Average

28% above national

Cost Multiplier

1.28x

Cost Per sq ft

$10–$64

Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →