Cost to Gutter Guard Installation in Seattle, WA (2026)
If you’re budgeting a gutter guard installation in Seattle, most projects run $1,074-$3,581, 19% above the $1,800 national average. What moves that number most is usually one thing: Guard Type & Material. On its own it can swing the cost by $2 - $15/linear ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Choose micro-mesh over reverse-curve systems - save $4-$8/linear ft with comparable debris protection
In the West Coast (where Seattle sits): Highest labor costs.
$1,074-$3,581 in Seattle
19% above the national average · 1.19x cost multiplier
In Seattle, a gutter guard installation runs $1,074 to $3,581 on average - about 19% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Seattle
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $6 | $12 | $21 |
| Materials | $285 | $798 | $1,710 |
| Labor | $378 | $882 | $1,260 |
| Permits | $0 | $0 | $0 |
| Total | $663+21% vs. national avg | $1,680+20% vs. national avg | $2,970+19% vs. national avg |
Budget
Basic mesh or foam gutter guards for 150 linear feet, snap-on installation
Mid-Range
Micro-mesh or perforated aluminum guards for 150 linear feet, professionally installed with gutter cleaning
Premium
Premium stainless steel micro-mesh or reverse-curve systems for 150 linear feet, with gutter repair and lifetime warranty
Material Options
Material prices below are national averages; availability in Seattle may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Foam Inserts | $2-$4/linear ft | Budget temporary solution, DIY installationCheapest option, easy DIY install, fits most gutters |
| Screen/Mesh Guards | $3-$6/linear ft | Areas with mainly leaf debris, moderate budgetsAffordable, easy to install and remove, blocks large debris |
| Micro-Mesh Guards | $6-$12/linear ft | Best overall performance, pine tree areas, long-term solutionBlocks virtually all debris including pine needles and shingle grit, durable, long-lasting |
| Reverse-Curve (Helmet) | $10-$18/linear ft | Heavy rainfall areas, homeowners wanting minimal maintenanceVery durable, handles heavy water flow, no visible screen from ground |
Other Projects in Seattle
Seattle Estimate
Typical Range
$1,074-$3,581
vs. National Average
19% above national
Cost Multiplier
1.19x
Cost Per linear ft
$6-$21
This 1.19x estimate prices Seattle labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →