Cost to Concrete Driveway Repair in Seattle, WA

$1,024–$4,480 in Seattle

28% above the national average · 1.28x cost multiplier

In Seattle, a concrete driveway repair runs $1,024 to $4,480 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Seattle

Line Item	Low	Mid	High
Cost per sq ft	$192	$5	$10240
Materials	$256	$1,152	$2,560
Labor	$384	$1,792	$5,760
Permits	$0	$0	$256
Total	$640+28% vs. national avg	$2,944+28% vs. national avg	$8,576+28% vs. national avg

Budget

Crack filling and sealing, minor surface patching, DIY-friendly repairs.

Mid-Range

Resurfacing/overlay on a 2-car driveway, fill and level before overlay, new seal coat.

Premium

Mudjacking sunken sections plus panel replacement and full reseal on a large driveway.

Material Options

Material prices below are national averages; availability in Seattle may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Crack Filler / Polyurethane Caulk	$15-$40/tube	DIY-friendly, flexible after cure, bonds well to existing concrete	Only appropriate for cracks under 1/2 inch wide, not a structural fix	Hairline cracks and narrow surface cracks on otherwise sound slabsDIY-friendly, flexible after cure, bonds well to existing concrete
Concrete Patching Compound	$20-$60/bag	Fills spalled areas and shallow holes, bonds well, matches concrete color reasonably	Visible patch lines, can pop out if base isn't properly prepared	Surface spalling, pitting, and small holes up to 2 inches deepFills spalled areas and shallow holes, bonds well, matches concrete color reasonably
Concrete Resurfacer (Overlay)	$0.50-$1.50/sq ft material	Renews entire surface appearance, bonds to existing concrete, extends life 10-15 years	Requires clean and profiled surface, won't fix structural cracks or sinking	Driveways with widespread surface deterioration but a structurally sound slabRenews entire surface appearance, bonds to existing concrete, extends life 10-15 years
Mudjacking / Slabjacking	$3-$6/sq ft	Lifts sunken slabs back to grade, less expensive than full replacement, minimal disruption	Doesn't fix the underlying soil problem permanently, not suitable for severely cracked slabs	Sunken or settled concrete sections that are otherwise intactLifts sunken slabs back to grade, less expensive than full replacement, minimal disruption
Full Panel Replacement	$8-$18/sq ft installed	Removes problem entirely, new concrete has full structural integrity, 25-30 year lifespan	Most expensive option, requires saw cutting and full demo, new section may not match aged concrete	Severely cracked, heaved, or structurally compromised panels where repair isn't viableRemoves problem entirely, new concrete has full structural integrity, 25-30 year lifespan

Other Projects in Seattle

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Concrete Driveway Repair

Seattle Estimate

Typical Range

$1,024–$4,480

vs. National Average

28% above national

Cost Multiplier

1.28x

Cost Per sq ft

$192–$10240

Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →