Cost to Asphalt Driveway Repair in Seattle, WA

$448–$4,480 in Seattle

28% above the national average · 1.28x cost multiplier

In Seattle, a asphalt driveway repair runs $448 to $4,480 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Seattle

Line Item	Low	Mid	High
Cost per project	$128	$1536	$7680
Materials	$192	$768	$2,304
Labor	$320	$1,408	$3,584
Permits	$0	$0	$192
Total	$512+28% vs. national avg	$2,176+28% vs. national avg	$6,080+28% vs. national avg

Budget

Crack sealing plus sealcoating a standard 600 sq ft driveway — fills cracks up to 1/2 inch wide and applies a protective coat.

Mid-Range

Patching potholes and damaged sections plus full resurfacing — best when surface has widespread cracking but base is still sound.

Premium

Partial or full replacement with new hot-mix asphalt — necessary when the base has failed, drainage problems exist, or damage is too extensive to resurface.

Material Options

Material prices below are national averages; availability in Seattle may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Cold Patch Asphalt	$2-$5 per sq ft	No equipment needed, available at hardware stores, can be applied in any weather	Less durable than hot mix, compacts poorly by hand, can heave or crumble within a few seasons if not properly compacted	DIY pothole patches, temporary repairs, small isolated damage spotsNo equipment needed, available at hardware stores, can be applied in any weather
Hot Mix Asphalt (Patching)	$3-$7 per sq ft installed	Durable, bonds well to existing asphalt, matches original appearance when done correctly	Requires a contractor with a hot-mix plant nearby, must be applied and compacted quickly before it cools	Contractor-installed pothole repairs, damaged sections requiring removal and replacementDurable, bonds well to existing asphalt, matches original appearance when done correctly
Asphalt Overlay / Resurfacing	$1.50-$4 per sq ft	Rejuvenates the entire driveway surface, hides cosmetic damage, extends driveway life 10-15 years if base is sound	Not appropriate if base has failed, raises driveway height slightly which can affect garage transitions	Driveways with widespread surface cracking but intact base, preparation before selling a homeRejuvenates the entire driveway surface, hides cosmetic damage, extends driveway life 10-15 years if base is sound
Full Asphalt Replacement	$3-$10 per sq ft	Addresses base problems, fresh start with 20-30 year lifespan, opportunity to improve grading and drainage	Most expensive option, typically takes 1-3 days of contractor time, new asphalt needs 24-48 hours before driving on it	Driveways with failed base, severe alligator cracking, drainage issues, or asphalt more than 20 years oldAddresses base problems, fresh start with 20-30 year lifespan, opportunity to improve grading and drainage

Other Projects in Seattle

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Asphalt Driveway Repair

Seattle Estimate

Typical Range

$448–$4,480

vs. National Average

28% above national

Cost Multiplier

1.28x

Cost Per project

$128–$7680

Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →