Cost to Tile Shower Pan Repair in Seattle, WA (2026)
If you’re budgeting a tile shower pan repair in Seattle, most projects run $379-$3,158, 26% above the $850 national average. What moves that number most is usually one thing: Repair vs. Full Replacement. On its own it can swing the cost by $150 - $5,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Before calling a contractor, tap every tile on the shower floor with a coin - hollow-sounding tiles signal a failed bond and will need replacement whether or not they look cracked
In the West Coast (where Seattle sits): Bay Area and LA add 25-40%; Seattle runs 20-30% above average; tile setters are in high demand.
$379-$3,158 in Seattle
26% above the national average · 1.26x cost multiplier
In Seattle, a tile shower pan repair runs $379 to $3,158 on average - about 26% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Seattle
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $19 | $38 | $57 |
| Materials | $86 | $399 | $1,368 |
| Labor | $233 | $1,000 | $2,934 |
| Permits | $0 | $0 | $171 |
| Total | $319+28% vs. national avg | $1,399+27% vs. national avg | $4,473+26% vs. national avg |
Budget
Grout repointing, caulk replacement at pan perimeter, and resealing. Addresses minor water intrusion at joints without replacing tile or liner.
Mid-Range
Replace cracked or stained tiles, repair or patch the waterproof liner, and re-grout affected area. Typical for a 16-25 sq ft shower pan with localized damage.
Premium
Full shower pan tear-out and replacement with custom tile on a mortar bed, new waterproof membrane, and matching field tile. Required when the liner has failed completely or subfloor damage is found.
Material Options
Material prices below are national averages; availability in Seattle may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Prefab Fiberglass or Acrylic Pan | $200-$600 per unit | Budget replacements in standard 32x32 or 36x36 alcove showersLowest material cost, no liner or mortar bed needed, installs quickly |
| PVC or CPE Tile-Over-Liner | $80-$200 per liner sheet | Custom tile shower floors in new or full-replacement workFlexible and durable, industry standard for custom tile installations, fully waterproof when properly dressed at corners |
| Hot-Mop Shower Pan | $250-$500 for the hot-mop service | Full pan replacements in markets where hot-mop contractors are availableSeamless waterproof layer, long track record in California and Southwest markets, sets in hours |
| Sheet Membrane (Schluter Kerdi, Wedi) | $3-$8 per sq ft for membrane | Renovations where minimizing floor buildup height mattersBonds directly to substrate, no mortar bed needed, faster install than liner systems |
| Prefab Tile Kit (e.g., Schluter Shower System) | $500-$1,200 per kit | Full replacements where reliability and warranty matter more than upfront costAll components engineered to work together, eliminates liner failure risk, tile-ready surface included |
Other Projects in Seattle
Seattle Estimate
Typical Range
$379-$3,158
vs. National Average
26% above national
Cost Multiplier
1.26x
Cost Per sq ft
$19-$57
This 1.26x estimate prices Seattle labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →