Cost to Bathroom Ventilation Fan Installation in Seattle, WA (2026)
If you’re budgeting a bathroom ventilation fan installation in Seattle, most projects run $189-$944, 26% above the $380 national average. What moves that number most is usually one thing: Replacement vs New Install. On its own it can swing the cost by $150 - $600, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Replace the fan in the same location and reuse existing wiring and ductwork - a direct swap costs $150-$250 versus $400-$600 for a new installation
In the West Coast (where Seattle sits): CA licensed electrician minimum rates are among the highest in the country.
$189-$944 in Seattle
26% above the national average · 1.26x cost multiplier
In Seattle, a bathroom ventilation fan installation runs $189 to $944 on average - about 26% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Seattle
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per unit | $101 | $478 | $1888 |
| Materials | $68 | $171 | $456 |
| Labor | $160 | $333 | $800 |
| Permits | $0 | $0 | $0 |
| Total | $228+27% vs. national avg | $504+26% vs. national avg | $1,256+26% vs. national avg |
Budget
Direct replacement, same location, basic fan, existing wiring.
Mid-Range
Upgrade fan with light, new switch, duct to exterior.
Premium
Combination unit (fan/light/heat/humidity sensor), new circuit.
Material Options
Material prices below are national averages; availability in Seattle may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Basic 50-110 CFM Fan | $30-$80 | Direct replacements, secondary bathroomsSimple, effective, quiet models available under $60 |
| Fan with Light | $60-$180 | Bathrooms without separate overhead lighting, most standard upgradesCombines ventilation and lighting in one unit, easy replacement of existing combo |
| Humidity-Sensing Fan | $80-$250 | Primary bathrooms, anyone who frequently forgets to run the fanRuns automatically when moisture rises - no switch required, prevents mold |
| Fan / Light / Heat Combo | $120-$350 | Cold climates, primary bathrooms without separate heat sourceAll-in-one ceiling unit, radiant heat takes the chill off after a shower |
| Inline Fan for Multiple Baths | $150-$400 | Multiple adjacent bathrooms, situations where noise is a concernOne powerful unit can serve multiple bathrooms, very quiet at the ceiling |
Other Projects in Seattle
Seattle Estimate
Typical Range
$189-$944
vs. National Average
26% above national
Cost Multiplier
1.26x
Cost Per unit
$101-$1888
This 1.26x estimate prices Seattle labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →