Cost to Bathroom Flooring in Seattle, WA

$640–$5,760 in Seattle

28% above the national average · 1.28x cost multiplier

In Seattle, a bathroom flooring runs $640 to $5,760 on average — about 28% above what homeowners pay nationwide. The West Coast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Seattle

Line Item	Low	Mid	High
Cost per sq ft	$4	$10	$23
Materials	$384	$768	$2,304
Labor	$640	$1,152	$2,816
Permits	$0	$0	$0
Total	$1,024+28% vs. national avg	$1,920+28% vs. national avg	$5,120+28% vs. national avg

Budget

Vinyl sheet or LVP, 50 sq ft, basic install, self-adhesive or floating

Mid-Range

Porcelain tile, 60 sq ft, standard lay, matching grout

Premium

Natural stone or large-format tile, custom pattern, heated underlayment

Material Options

Material prices below are national averages; availability in Seattle may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Ceramic Tile	$2-$5/sq ft materials	Durable, water-resistant, huge style selection, affordable	Cold underfoot, grout lines need maintenance, can crack	Budget to mid-range bathrooms, high-traffic floorsDurable, water-resistant, huge style selection, affordable
Porcelain Tile	$3-$10/sq ft materials	Lower water absorption than ceramic, very durable, mimics stone or wood	Harder to cut, heavier, higher cost	Wet areas, primary baths, long-term installationsLower water absorption than ceramic, very durable, mimics stone or wood
Luxury Vinyl Plank (LVP)	$2-$6/sq ft materials	100% waterproof, warm and soft underfoot, DIY-friendly floating install, lower cost	Not as premium-looking, can't be refinished	Budget remodels, rentals, families with kids, DIY installs100% waterproof, warm and soft underfoot, DIY-friendly floating install, lower cost
Natural Stone (Marble/Travertine)	$8-$25/sq ft materials	Unique beauty, premium look, adds home value	Requires sealing, porous, higher maintenance, expensive	Primary baths where aesthetics are priorityUnique beauty, premium look, adds home value
Vinyl Sheet	$1-$3/sq ft materials	Seamless surface, fully waterproof, very low cost, easy to clean	Less durable long-term, limited design, can tear	Rental properties, budget bathrooms, quick turnaroundsSeamless surface, fully waterproof, very low cost, easy to clean

Other Projects in Seattle

Full Kitchen Remodel

Full Bathroom Remodel

Composite Deck Building

Back to national average for Bathroom Flooring

Seattle Estimate

Typical Range

$640–$5,760

vs. National Average

28% above national

Cost Multiplier

1.28x

Cost Per sq ft

$4–$23

Estimates apply Seattle's 1.28x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →