Cost to Wood Rot Repair in Memphis, TN

$410–$2,050 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $410–$2,050 for a wood rot repair in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line Item	Low	Mid	High
Cost per area	$82	$984	$8200
Materials	$123	$492	$2,050
Labor	$164	$984	$4,100
Permits	$0	$82	$410
Total	$287-18% vs. national avg	$1,558-18% vs. national avg	$6,560-18% vs. national avg

Budget

Small areas of surface rot, 1-3 boards, epoxy consolidant and filler repair.

Mid-Range

Moderate rot in window sills, door frames, fascia boards, or deck posts - 4-15 linear feet replaced.

Premium

Structural rot in floor joists, sill plates, or subfloor requiring sistering or full replacement with temporary shoring.

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Epoxy Wood Filler (LiquidWood + WoodEpox)	$40-$80 per kit	Excellent for cosmetic repairs, bonds to remaining wood, sandable and paintable, no removal required	Not structural - should not be used on load-bearing members, requires dry wood to bond properly	Small surface rot on window sills, door frames, decorative trim, and non-structural areasExcellent for cosmetic repairs, bonds to remaining wood, sandable and paintable, no removal required
Pressure-Treated Lumber Replacement	$3-$8 per linear ft materials	25+ year lifespan, required code material for ground contact, widely available, strong	Requires full removal of rotted section, needs proper fasteners for treated lumber	Any wood in contact with soil, concrete, or chronically wet areas - deck posts, sill plates, framing near grade25+ year lifespan, required code material for ground contact, widely available, strong
Clear Heart Redwood or Cedar	$8-$20 per linear ft materials	Naturally rot resistant, attractive grain, good for visible areas, takes stain well	More expensive than pressure-treated, supply can be limited depending on region	Visible exterior trim, fascia, and decorative elements where appearance mattersNaturally rot resistant, attractive grain, good for visible areas, takes stain well
Composite or PVC Trim	$5-$15 per linear ft materials	Zero rot risk, never needs painting, dimensionally stable, low lifetime maintenance cost	Higher upfront cost than wood, different thermal expansion behavior, not appropriate for structural use	Fascia boards, rake boards, window trim, and any exterior trim you never want to repair againZero rot risk, never needs painting, dimensionally stable, low lifetime maintenance cost
Sister Joists (Structural)	$15-$35 per linear ft materials plus significant labor	Restores structural integrity alongside the damaged member, avoids full joist removal in many cases	Labor intensive, may require temporary shoring, permit required, adds material cost on top of existing joist	Floor joists and rafters with rot limited to sections of the member where sistering is code-acceptableRestores structural integrity alongside the damaged member, avoids full joist removal in many cases

Other Projects in Memphis

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Wood Rot Repair

Memphis Estimate

Typical Range

$410–$2,050

vs. National Average

18% below national

Cost Multiplier

0.82x

Cost Per area

$82–$8200

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →