Cost to Wood Rot Repair in Denver, CO

$560–$2,800 in Denver

12% above the national average · 1.12x cost multiplier

Expect to pay $560–$2,800 for a wood rot repair in Denver, about 12% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Cost per area	$112	$1344	$11200
Materials	$168	$672	$2,800
Labor	$224	$1,344	$5,600
Permits	$0	$112	$560
Total	$392+12% vs. national avg	$2,128+12% vs. national avg	$8,960+12% vs. national avg

Budget

Small areas of surface rot, 1-3 boards, epoxy consolidant and filler repair.

Mid-Range

Moderate rot in window sills, door frames, fascia boards, or deck posts - 4-15 linear feet replaced.

Premium

Structural rot in floor joists, sill plates, or subfloor requiring sistering or full replacement with temporary shoring.

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Epoxy Wood Filler (LiquidWood + WoodEpox)	$40-$80 per kit	Excellent for cosmetic repairs, bonds to remaining wood, sandable and paintable, no removal required	Not structural - should not be used on load-bearing members, requires dry wood to bond properly	Small surface rot on window sills, door frames, decorative trim, and non-structural areasExcellent for cosmetic repairs, bonds to remaining wood, sandable and paintable, no removal required
Pressure-Treated Lumber Replacement	$3-$8 per linear ft materials	25+ year lifespan, required code material for ground contact, widely available, strong	Requires full removal of rotted section, needs proper fasteners for treated lumber	Any wood in contact with soil, concrete, or chronically wet areas - deck posts, sill plates, framing near grade25+ year lifespan, required code material for ground contact, widely available, strong
Clear Heart Redwood or Cedar	$8-$20 per linear ft materials	Naturally rot resistant, attractive grain, good for visible areas, takes stain well	More expensive than pressure-treated, supply can be limited depending on region	Visible exterior trim, fascia, and decorative elements where appearance mattersNaturally rot resistant, attractive grain, good for visible areas, takes stain well
Composite or PVC Trim	$5-$15 per linear ft materials	Zero rot risk, never needs painting, dimensionally stable, low lifetime maintenance cost	Higher upfront cost than wood, different thermal expansion behavior, not appropriate for structural use	Fascia boards, rake boards, window trim, and any exterior trim you never want to repair againZero rot risk, never needs painting, dimensionally stable, low lifetime maintenance cost
Sister Joists (Structural)	$15-$35 per linear ft materials plus significant labor	Restores structural integrity alongside the damaged member, avoids full joist removal in many cases	Labor intensive, may require temporary shoring, permit required, adds material cost on top of existing joist	Floor joists and rafters with rot limited to sections of the member where sistering is code-acceptableRestores structural integrity alongside the damaged member, avoids full joist removal in many cases

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Wood Rot Repair

Denver Estimate

Typical Range

$560–$2,800

vs. National Average

12% above national

Cost Multiplier

1.12x

Cost Per area

$112–$11200

Estimates apply Denver's 1.12x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →