Cost to Wood Rot Repair in Boise, ID (2026)
If you’re budgeting a wood rot repair in Boise, most projects run $461-$2,303, 8% below the $1,200 national average. What moves that number most is usually one thing: Location of Rot. On its own it can swing the cost by $300 - $8,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Address the moisture source immediately - whether it is a clogged gutter, failed caulk, or poor drainage, fixing the water intrusion is the only way to prevent the rot from returning
In the Mountain West (where Boise sits): Denver and Salt Lake City near or above national average; rural areas lower.
$461-$2,303 in Boise
8% below the national average · 0.92x cost multiplier
Expect to pay $461-$2,303 for a wood rot repair in Boise, about 8% below the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Boise prices.
Cost Breakdown in Boise
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per area | $92 | $1105 | $9211 |
| Materials | $154 | $615 | $2,563 |
| Labor | $172 | $1,030 | $4,293 |
| Permits | $0 | $102 | $513 |
| Total | $326-7% vs. national avg | $1,747-8% vs. national avg | $7,369-8% vs. national avg |
Budget
Small areas of surface rot, 1-3 boards, epoxy consolidant and filler repair.
Mid-Range
Moderate rot in window sills, door frames, fascia boards, or deck posts - 4-15 linear feet replaced.
Premium
Structural rot in floor joists, sill plates, or subfloor requiring sistering or full replacement with temporary shoring.
Material Options
Material prices below are national averages; availability in Boise may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Epoxy Wood Filler (LiquidWood + WoodEpox) | $40-$80 per kit | Small surface rot on window sills, door frames, decorative trim, and non-structural areasExcellent for cosmetic repairs, bonds to remaining wood, sandable and paintable, no removal required |
| Pressure-Treated Lumber Replacement | $3-$8 per linear ft materials | Any wood in contact with soil, concrete, or chronically wet areas - deck posts, sill plates, framing near grade25+ year lifespan, required code material for ground contact, widely available, strong |
| Clear Heart Redwood or Cedar | $8-$20 per linear ft materials | Visible exterior trim, fascia, and decorative elements where appearance mattersNaturally rot resistant, attractive grain, good for visible areas, takes stain well |
| Composite or PVC Trim | $5-$15 per linear ft materials | Fascia boards, rake boards, window trim, and any exterior trim you never want to repair againZero rot risk, never needs painting, dimensionally stable, low lifetime maintenance cost |
| Sister Joists (Structural) | $15-$35 per linear ft materials plus significant labor | Floor joists and rafters with rot limited to sections of the member where sistering is code-acceptableRestores structural integrity alongside the damaged member, avoids full joist removal in many cases |
Other Projects in Boise
Boise Estimate
Typical Range
$461-$2,303
vs. National Average
8% below national
Cost Multiplier
0.92x
Cost Per area
$92-$9211
This 0.92x estimate prices Boise labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →