Cost to Water Damage Restoration in San Antonio, TX

$1,068–$4,450 in San Antonio

11% below the national average · 0.89x cost multiplier

Expect to pay $1,068–$4,450 for a water damage restoration in San Antonio, about 11% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Antonio prices.

Cost Breakdown in San Antonio

Line Item	Low	Mid	High
Materials	$267	$801	$4,450
Labor	$801	$1,958	$10,680
Permits	$0	$178	$445
Total	$1,068-11% vs. national avg	$2,937-11% vs. national avg	$15,575-11% vs. national avg

Budget

Minor water damage - small leak from a supply line or appliance confined to one area. Drying equipment, limited drywall removal and replacement, repainting. No mold found, no structural damage, clean water source.

Mid-Range

Moderate water damage from a burst pipe or appliance overflow affecting one or two rooms. Includes industrial drying, drywall removal and replacement, flooring removal and replacement (LVP or carpet), mold prevention treatment, and repainting.

Premium

Major water damage from flooding, sewage backup, or long-term undetected leak. Multiple rooms affected. Includes full drying and dehumidification, structural drying or replacement, mold remediation, flooring and wall replacement throughout, and subfloor repair or replacement.

Material Options

Material prices below are national averages; availability in San Antonio may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Drying Only (No Structural Damage)	$1,000-$3,000 flat	Lowest cost if caught quickly; industrial air movers and dehumidifiers can dry a space in 3-5 days	Only works if damage is caught within 24-48 hours before mold risk becomes serious	Small clean-water leaks caught immediatelyLowest cost if caught quickly; industrial air movers and dehumidifiers can dry a space in 3-5 days
Drying + Drywall Replacement	$2-$4/sq ft for drywall demo and replacement	Standard repair path for most confined water events	Requires painting after replacement; baseboard and trim replacement often needed too	Most residential water damage scenariosStandard repair path for most confined water events
Full Flooring Replacement	$3-$12/sq ft depending on flooring type	Removes all saturated material, prevents mold under flooring	High cost; may not match existing flooring in adjacent areas	Carpet (must always be replaced when wet), LVP and hardwood if severely damagedRemoves all saturated material, prevents mold under flooring
Subfloor Repair or Replacement	$2-$6/sq ft	Addresses structural damage that causes floor bounce or softness	Adds significant cost and timeline; requires flooring to be removed first	Long-duration leaks where subfloor has delaminated or shows rotAddresses structural damage that causes floor bounce or softness
Sewage/Black Water Full Remediation	$7-$14/sq ft	Properly eliminates health hazard; full restoration compliant with EPA guidelines	Most expensive option; requires licensed remediation contractor	All sewage backup, flood water, or Category 3 water eventsProperly eliminates health hazard; full restoration compliant with EPA guidelines

Other Projects in San Antonio

Full Kitchen Remodel

Central AC Installation

Full Bathroom Remodel

Back to national average for Water Damage Restoration

San Antonio Estimate

Typical Range

$1,068–$4,450

vs. National Average

11% below national

Cost Multiplier

0.89x

Estimates apply San Antonio's 0.89x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →