How much does a termite damage repair cost in Memphis?

A termite damage repair in Memphis typically costs $855-$8,552, 14% below the $3,500 national average.

What is the cost per linear ft of damaged framing for a termite damage repair in Memphis?

Termite Damage Repair in Memphis typically costs $86-$684 per linear ft of damaged framing.

How long does a termite damage repair take?

A termite damage repair typically takes 3-7 days. The minimum timeline is 1-2 days, and complex projects can run 4-6 weeks.

Can I DIY a termite damage repair?

DIY feasibility for a termite damage repair is rated Low to Medium - Minor non-structural repairs (trim, fascia, window casings) are DIY-friendly. Structural framing repairs require temporary shoring knowledge and should involve professionals..

Cost to Termite Damage Repair in Memphis, TN (2026)

If you’re budgeting a termite damage repair in Memphis, most projects run $855-$8,552, 14% below the $3,500 national average. What moves that number most is usually one thing: Extent and Location of Damage. On its own it can swing the cost by $300 - $60,000+, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Get a termite inspection before buying an older home, especially in the South, Southwest, and coastal areas. A $75-$150 inspection can save you from a surprise $10,000-$30,000 repair after closing.

$855-$8,552 in Memphis

14% below the national average · 0.86x cost multiplier

Expect to pay $855-$8,552 for a termite damage repair in Memphis, about 14% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line Item	Low	Mid	High
Cost per linear ft of damaged framing	$86	$299	$684
Materials	$364	$1,638	$7,280
Labor	$569	$2,603	$11,386
Permits	$0	$455	$1,365
Total	$933-15% vs. national avg	$4,696-15% vs. national avg	$21,396-14% vs. national avg

Budget

Minor damage repair - replacing 2-3 damaged floor joists or wall studs, no structural members affected, surface-level cosmetic restoration.

Mid-Range

Moderate damage affecting several floor joists, subfloor sections, or wall framing, sistering damaged members, partial flooring replacement.

Premium

Extensive damage to structural members, sill plates, rim joists, and subfloor throughout a significant area, requiring engineer assessment and full framing replacement.

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Sistering Damaged Joists	$200-$600 per joist	Less invasive than full replacement, maintains floor elevation, no need to remove subfloor above	Only works when the original member is still partially intact for nailing surface	Floor joists with localized damage that retain at least 50% of their structural sectionLess invasive than full replacement, maintains floor elevation, no need to remove subfloor above
Full Joist or Stud Replacement	$400-$900 per member	Complete structural restoration, like-new performance, required for severely damaged members	Requires temporary shoring for load-bearing members, more invasive and time-consuming	Members with severe damage, collapse risk, or widespread decay beyond sisteringComplete structural restoration, like-new performance, required for severely damaged members
Sill Plate Replacement	$200-$500 per linear ft	Restores the critical connection between framing and foundation, uses pressure-treated lumber resistant to future infestation	Requires temporary shoring of the entire wall above, time-consuming, often combined with foundation work	Sill plate damage - the highest-priority structural repair for termite-damaged homesRestores the critical connection between framing and foundation, uses pressure-treated lumber resistant to future infestation
Epoxy Wood Consolidant and Filler	$30-$100 per application	Non-invasive, fills voids in partially damaged wood, can restore structural integrity of minor damage, paintable	Only appropriate for minor surface damage, not a replacement for severely compromised structural members	Window sills, door frames, exterior trim with minor to moderate damage where replacement is impracticalNon-invasive, fills voids in partially damaged wood, can restore structural integrity of minor damage, paintable
Pressure-Treated Lumber Replacement	$300-$800 per member	Chemically treated to resist future termite damage, required in many jurisdictions for ground-contact applications	Slightly more expensive than standard dimensional lumber, some types cannot be used in interior applications	Sill plates, rim joists, and any framing within 6 inches of soil or concreteChemically treated to resist future termite damage, required in many jurisdictions for ground-contact applications

Other Projects in Memphis

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Termite Damage Repair

Memphis Estimate

Typical Range

$855-$8,552

vs. National Average

14% below national

Cost Multiplier

0.86x

Cost Per linear ft of damaged framing

$86-$684

This 0.86x estimate prices Memphis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →