Cost to Termite Damage Repair in Houston, TX

$920–$9,200 in Houston

8% below the national average · 0.92x cost multiplier

In Houston, a termite damage repair runs $920 to $9,200 on average — about 8% below what homeowners pay nationwide. The South market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Houston

Line Item	Low	Mid	High
Cost per linear ft of damaged framing	$92	$322	$736
Materials	$368	$1,656	$7,360
Labor	$644	$2,944	$12,880
Permits	$0	$460	$1,380
Total	$1,012-8% vs. national avg	$5,060-8% vs. national avg	$23,000-8% vs. national avg

Budget

Minor damage repair - replacing 2-3 damaged floor joists or wall studs, no structural members affected, surface-level cosmetic restoration.

Mid-Range

Moderate damage affecting several floor joists, subfloor sections, or wall framing, sistering damaged members, partial flooring replacement.

Premium

Extensive damage to structural members, sill plates, rim joists, and subfloor throughout a significant area, requiring engineer assessment and full framing replacement.

Material Options

Material prices below are national averages; availability in Houston may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Sistering Damaged Joists	$200-$600 per joist	Less invasive than full replacement, maintains floor elevation, no need to remove subfloor above	Only works when the original member is still partially intact for nailing surface	Floor joists with localized damage that retain at least 50% of their structural sectionLess invasive than full replacement, maintains floor elevation, no need to remove subfloor above
Full Joist or Stud Replacement	$400-$900 per member	Complete structural restoration, like-new performance, required for severely damaged members	Requires temporary shoring for load-bearing members, more invasive and time-consuming	Members with severe damage, collapse risk, or widespread decay beyond sisteringComplete structural restoration, like-new performance, required for severely damaged members
Sill Plate Replacement	$200-$500 per linear ft	Restores the critical connection between framing and foundation, uses pressure-treated lumber resistant to future infestation	Requires temporary shoring of the entire wall above, time-consuming, often combined with foundation work	Sill plate damage - the highest-priority structural repair for termite-damaged homesRestores the critical connection between framing and foundation, uses pressure-treated lumber resistant to future infestation
Epoxy Wood Consolidant and Filler	$30-$100 per application	Non-invasive, fills voids in partially damaged wood, can restore structural integrity of minor damage, paintable	Only appropriate for minor surface damage, not a replacement for severely compromised structural members	Window sills, door frames, exterior trim with minor to moderate damage where replacement is impracticalNon-invasive, fills voids in partially damaged wood, can restore structural integrity of minor damage, paintable
Pressure-Treated Lumber Replacement	$300-$800 per member	Chemically treated to resist future termite damage, required in many jurisdictions for ground-contact applications	Slightly more expensive than standard dimensional lumber, some types cannot be used in interior applications	Sill plates, rim joists, and any framing within 6 inches of soil or concreteChemically treated to resist future termite damage, required in many jurisdictions for ground-contact applications

Other Projects in Houston

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Termite Damage Repair

Houston Estimate

Typical Range

$920–$9,200

vs. National Average

8% below national

Cost Multiplier

0.92x

Cost Per linear ft of damaged framing

$92–$736

Estimates apply Houston's 0.92x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →