Cost to Mold Remediation in Providence, RI (2026)
If you’re budgeting a mold remediation in Providence, most projects run $529-$6,347, 6% above the $2,500 national average. What moves that number most is usually one thing: Mold Type and Toxicity. On its own it can swing the cost by $500-$5,000 premium for black mold (Stachybotrys), so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Test before you treat. A professional mold inspection ($200-$600) can confirm whether you have a large mold problem or surface condensation that looks like mold. This $300 investment prevents spending $3,000 unnecessarily.
In the Northeast (where Providence sits): Higher labor; cold climate creates ice dam and leak-driven mold risk.
$529-$6,347 in Providence
6% above the national average · 1.06x cost multiplier
Homeowners in Providence typically spend $529-$6,347 on a mold remediation, about 6% above the national average. Labor rates and contractor availability in the Northeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Providence
| Line Item | Low | Mid | High |
|---|---|---|---|
| Materials | $161 | $645 | $2,150 |
| Labor | $473 | $1,788 | $7,887 |
| Permits | $0 | $215 | $538 |
| Total | $634+6% vs. national avg | $2,648+6% vs. national avg | $10,575+6% vs. national avg |
Budget
Small surface mold (under 10 sq ft) in a bathroom or near a window. HEPA cleaning, antimicrobial treatment, limited drywall removal if needed. No containment setup required per EPA guidelines for small areas.
Mid-Range
Moderate mold in one or two areas (10-100 sq ft). Includes containment setup, air scrubbers with HEPA filtration, removal of affected drywall and insulation, antimicrobial treatment, clearance testing, and basic rebuild.
Premium
Extensive mold growth (100+ sq ft) in crawl space, basement, or multiple rooms. Full containment, negative air pressure, removal of all affected materials, structural drying, encapsulation, clearance air quality testing, and complete rebuild of affected surfaces.
Material Options
Material prices below are national averages; availability in Providence may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Surface Treatment Only (DIY Small Area) | $50-$200 total | Bathroom grout mold, small window sill mold, visible surface-only mold in dry areasVery low cost for small surface mold under 10 sq ft per EPA guidance |
| Professional Surface Remediation | $500-$1,500 per room | Any mold on walls or ceilings in living spaces; bathroom mold behind tileProper containment and HEPA vacuuming prevents spore spread; includes clearance testing |
| Drywall Removal and Replacement | $3-$6/sq ft for demo and $2-$4/sq ft for replacement | Mold that has penetrated through drywall paper or is behind wallsFully removes mold-contaminated material rather than treating in place |
| Crawl Space Encapsulation (Post-Remediation) | $5,000-$15,000 | Crawl spaces with history of moisture issues; any home in humid climatesPermanently controls humidity to prevent mold recurrence; also improves energy efficiency |
| HVAC Mold Treatment and Duct Cleaning | $3,000-$10,000 | Homes where mold smell persists after visible remediation, or where HVAC is near a known mold sourcePrevents recirculation of spores through the home; required if mold has entered the HVAC system |
Other Projects in Providence
Providence Estimate
Typical Range
$529-$6,347
vs. National Average
6% above national
Cost Multiplier
1.06x
This 1.06x estimate prices Providence labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →