Cost to Mold Remediation in Philadelphia, PA

$610–$7,320 in Philadelphia

22% above the national average · 1.22x cost multiplier

Expect to pay $610–$7,320 for a mold remediation in Philadelphia, about 22% above the national benchmark. The Northeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Philadelphia prices.

Cost Breakdown in Philadelphia

Line Item	Low	Mid	High
Materials	$183	$732	$2,440
Labor	$549	$2,074	$9,150
Permits	$0	$244	$610
Total	$732+22% vs. national avg	$3,050+22% vs. national avg	$12,200+22% vs. national avg

Budget

Small surface mold (under 10 sq ft) in a bathroom or near a window. HEPA cleaning, antimicrobial treatment, limited drywall removal if needed. No containment setup required per EPA guidelines for small areas.

Mid-Range

Moderate mold in one or two areas (10-100 sq ft). Includes containment setup, air scrubbers with HEPA filtration, removal of affected drywall and insulation, antimicrobial treatment, clearance testing, and basic rebuild.

Premium

Extensive mold growth (100+ sq ft) in crawl space, basement, or multiple rooms. Full containment, negative air pressure, removal of all affected materials, structural drying, encapsulation, clearance air quality testing, and complete rebuild of affected surfaces.

Material Options

Material prices below are national averages; availability in Philadelphia may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Surface Treatment Only (DIY Small Area)	$50-$200 total	Very low cost for small surface mold under 10 sq ft per EPA guidance	Only appropriate for non-porous surfaces and very limited mold; DIY risks include spreading spores without proper containment	Bathroom grout mold, small window sill mold, visible surface-only mold in dry areasVery low cost for small surface mold under 10 sq ft per EPA guidance
Professional Surface Remediation	$500-$1,500 per room	Proper containment and HEPA vacuuming prevents spore spread; includes clearance testing	Higher cost than DIY; requires temporarily vacating the space	Any mold on walls or ceilings in living spaces; bathroom mold behind tileProper containment and HEPA vacuuming prevents spore spread; includes clearance testing
Drywall Removal and Replacement	$3-$6/sq ft for demo and $2-$4/sq ft for replacement	Fully removes mold-contaminated material rather than treating in place	More invasive and expensive; requires rebuild after remediation	Mold that has penetrated through drywall paper or is behind wallsFully removes mold-contaminated material rather than treating in place
Crawl Space Encapsulation (Post-Remediation)	$5,000-$15,000	Permanently controls humidity to prevent mold recurrence; also improves energy efficiency	Significant cost on top of remediation; adds 1-2 weeks to project	Crawl spaces with history of moisture issues; any home in humid climatesPermanently controls humidity to prevent mold recurrence; also improves energy efficiency
HVAC Mold Treatment and Duct Cleaning	$3,000-$10,000	Prevents recirculation of spores through the home; required if mold has entered the HVAC system	Expensive; duct replacement may be necessary in severe cases	Homes where mold smell persists after visible remediation, or where HVAC is near a known mold sourcePrevents recirculation of spores through the home; required if mold has entered the HVAC system

Other Projects in Philadelphia

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Mold Remediation

Philadelphia Estimate

Typical Range

$610–$7,320

vs. National Average

22% above national

Cost Multiplier

1.22x

Estimates apply Philadelphia's 1.22x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →