Cost to Mold Remediation in Dallas, TX (2026)
If you’re budgeting a mold remediation in Dallas, most projects run $409-$4,909, 18% below the $2,500 national average. What moves that number most is usually one thing: Mold Type and Toxicity. On its own it can swing the cost by $500-$5,000 premium for black mold (Stachybotrys), so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Test before you treat. A professional mold inspection ($200-$600) can confirm whether you have a large mold problem or surface condensation that looks like mold. This $300 investment prevents spending $3,000 unnecessarily.
In the Southeast (where Dallas sits): High humidity creates elevated mold frequency; competitive market for remediation services.
$409-$4,909 in Dallas
18% below the national average · 0.82x cost multiplier
In Dallas, a mold remediation runs $409 to $4,909 on average - about 18% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Materials | $145 | $579 | $1,930 |
| Labor | $345 | $1,302 | $5,743 |
| Permits | $0 | $193 | $483 |
| Total | $490-18% vs. national avg | $2,074-17% vs. national avg | $8,156-18% vs. national avg |
Budget
Small surface mold (under 10 sq ft) in a bathroom or near a window. HEPA cleaning, antimicrobial treatment, limited drywall removal if needed. No containment setup required per EPA guidelines for small areas.
Mid-Range
Moderate mold in one or two areas (10-100 sq ft). Includes containment setup, air scrubbers with HEPA filtration, removal of affected drywall and insulation, antimicrobial treatment, clearance testing, and basic rebuild.
Premium
Extensive mold growth (100+ sq ft) in crawl space, basement, or multiple rooms. Full containment, negative air pressure, removal of all affected materials, structural drying, encapsulation, clearance air quality testing, and complete rebuild of affected surfaces.
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Surface Treatment Only (DIY Small Area) | $50-$200 total | Bathroom grout mold, small window sill mold, visible surface-only mold in dry areasVery low cost for small surface mold under 10 sq ft per EPA guidance |
| Professional Surface Remediation | $500-$1,500 per room | Any mold on walls or ceilings in living spaces; bathroom mold behind tileProper containment and HEPA vacuuming prevents spore spread; includes clearance testing |
| Drywall Removal and Replacement | $3-$6/sq ft for demo and $2-$4/sq ft for replacement | Mold that has penetrated through drywall paper or is behind wallsFully removes mold-contaminated material rather than treating in place |
| Crawl Space Encapsulation (Post-Remediation) | $5,000-$15,000 | Crawl spaces with history of moisture issues; any home in humid climatesPermanently controls humidity to prevent mold recurrence; also improves energy efficiency |
| HVAC Mold Treatment and Duct Cleaning | $3,000-$10,000 | Homes where mold smell persists after visible remediation, or where HVAC is near a known mold sourcePrevents recirculation of spores through the home; required if mold has entered the HVAC system |
Other Projects in Dallas
Dallas Estimate
Typical Range
$409-$4,909
vs. National Average
18% below national
Cost Multiplier
0.82x
This 0.82x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →