Cost to Chimney Repair and Rebuild in Jacksonville, FL

$910–$4,550 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a chimney repair and rebuild runs $910 to $4,550 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line Item	Low	Mid	High
Cost per linear ft of chimney height	$91	$182	$319
Materials	$273	$728	$2,275
Labor	$546	$1,274	$3,185
Permits	$91	$137	$273
Total	$910-9% vs. national avg	$2,275-9% vs. national avg	$6,006-9% vs. national avg

Budget

Minor repairs: crown repair or replacement, tuckpointing 10-20 sq ft of mortar joints, basic flashing repair, single-story chimney

Mid-Range

Moderate repairs: partial rebuild of top 3-5 feet, new chimney cap, full crown replacement, flashing replacement, liner repair for a two-story chimney

Premium

Major rebuild: full chimney rebuild above roofline (8-12 ft), new stainless steel liner, custom cap, all new flashing, two-story exterior chimney

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Tuckpointing (Mortar Joint Repair)	$5-$25 per sq ft of chimney face	Least expensive fix, preserves original brick, extends chimney life 20-30 years	Only works if the brick itself is sound, time-consuming, requires skill to match mortar color	Chimneys with deteriorated mortar joints but solid bricks, typically 15-30 years oldLeast expensive fix, preserves original brick, extends chimney life 20-30 years
Partial Rebuild (Above Roofline)	$150-$300 per linear ft of height	Addresses structural deterioration, new mortar and brick last 50+ years, opportunity to add proper cap and crown	More expensive than tuckpointing, requires scaffolding, brick matching can be difficult	Chimneys where the top section has significant spalling, cracking, or leaningAddresses structural deterioration, new mortar and brick last 50+ years, opportunity to add proper cap and crown
Full Chimney Rebuild	$200-$350 per linear ft of height	Completely new structure, maximum lifespan, can correct design flaws, includes new liner	Most expensive option, longer project timeline, may require temporary roof patching	Severely deteriorated chimneys with structural concerns, or chimneys that have shifted or separated from the houseCompletely new structure, maximum lifespan, can correct design flaws, includes new liner
Stainless Steel Liner Installation	$50-$120 per linear ft of liner	Lifetime warranty available, improves draft, reduces creosote buildup, fits inside existing chimney	Does not fix exterior deterioration, requires chimney to be structurally sound, adds cost to other repairs	Chimneys with cracked or deteriorated clay flue liners that are otherwise structurally soundLifetime warranty available, improves draft, reduces creosote buildup, fits inside existing chimney
Chimney Cap and Crown Replacement	$150-$800 per chimney (cap), $300-$800 (crown)	Prevents water entry, keeps animals out, relatively inexpensive, extends chimney life significantly	Does not fix existing structural damage, cap style must match home aesthetics	Preventive maintenance or chimneys with water damage caused by a missing or cracked cap/crownPrevents water entry, keeps animals out, relatively inexpensive, extends chimney life significantly

Other Projects in Jacksonville

Roof Replacement (Asphalt Shingles)

Full Bathroom Remodel

Back to national average for Chimney Repair and Rebuild

Jacksonville Estimate

Typical Range

$910–$4,550

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per linear ft of chimney height

$91–$319

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →