How much does a bump-out addition cost in Providence?

A bump-out addition in Providence typically costs $10,638-$53,188, 6% above the $22,000 national average.

What is the cost per sq ft for a bump-out addition in Providence?

Bump-Out Addition in Providence typically costs $96-$266 per sq ft.

How long does a bump-out addition take?

A bump-out addition typically takes 6-10 weeks. The minimum timeline is 3 weeks, and complex projects can run 4 months.

Can I DIY a bump-out addition?

DIY feasibility for a bump-out addition is rated Low to Medium - A small cantilevered bump-out for an experienced DIYer is possible for the finish work, but structural connections, permits, and roofing should involve licensed professionals..

Cost to Bump-Out Addition in Providence, RI (2026)

If you’re budgeting a bump-out addition in Providence, most projects run $10,638-$53,188, 6% above the $22,000 national average. What moves that number most is usually one thing: Foundation Type. On its own it can swing the cost by $0 - $15,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Keep the bump-out to 2 feet or less so it can cantilever off existing framing - this eliminates foundation costs entirely.

$10,638-$53,188 in Providence

6% above the national average · 1.06x cost multiplier

Homeowners in Providence typically spend $10,638-$53,188 on a bump-out addition, about 6% above the national average. Labor rates and contractor availability in the Northeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Providence

Line Item	Low	Mid	High
Cost per sq ft	$96	$170	$266
Materials	$4,300	$9,138	$19,350
Labor	$6,310	$11,568	$23,137
Permits	$1,290	$2,150	$3,225
Design	$860	$1,613	$3,225
Total	$12,760+6% vs. national avg	$24,469+6% vs. national avg	$48,937+6% vs. national avg

Budget

Small 60-80 sq ft bump-out, cantilevered over existing foundation, no foundation work needed, standard materials matching existing siding.

Mid-Range

100-150 sq ft bump-out with foundation piers or slab extension, mid-grade finishes, energy-efficient windows, basic electrical.

Premium

200+ sq ft bump-out with full concrete foundation, premium materials, custom windows, dedicated heating/cooling, high-end finishes.

Material Options

Material prices below are national averages; availability in Providence may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Cantilevered (No New Foundation)	$90-$130 per sq ft	Lowest cost option, no excavation or foundation work, fastest construction	Limited to 2-foot extension maximum in most cases, some structural limitations	Small bathroom, closet, or bay window expansions of 2-3 feet depthLowest cost option, no excavation or foundation work, fastest construction
Concrete Pier Foundation	$110-$160 per sq ft	Good for medium-sized bump-outs, minimal excavation, stable support	Not suitable for very large bump-outs, some areas require frost depth piers	Bump-outs of 3-6 feet depth in moderate climatesGood for medium-sized bump-outs, minimal excavation, stable support
Poured Concrete Slab	$130-$190 per sq ft	Solid, stable, can support any size addition, good for kitchen/dining expansions	Requires excavation and grading, longer construction timeline	Kitchen or family room bump-outs where a durable floor is neededSolid, stable, can support any size addition, good for kitchen/dining expansions
Full Perimeter Foundation	$160-$250 per sq ft	Most stable, allows crawl space access, supports heavy loads and large bump-outs	Most expensive, requires extensive excavation, longest construction timeline	Large bump-outs over 150 sq ft or in areas with challenging soil conditionsMost stable, allows crawl space access, supports heavy loads and large bump-outs

Other Projects in Providence

Roof Replacement (Asphalt Shingles)

Full Kitchen Remodel

Window Replacement

Back to national average for Bump-Out Addition

Providence Estimate

Typical Range

$10,638-$53,188

vs. National Average

6% above national

Cost Multiplier

1.06x

Cost Per sq ft

$96-$266

This 1.06x estimate prices Providence labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →