How much does a bump-out addition cost in Minneapolis?

A bump-out addition in Minneapolis typically costs $10,786-$53,929, 8% above the $22,000 national average.

What is the cost per sq ft for a bump-out addition in Minneapolis?

Bump-Out Addition in Minneapolis typically costs $97-$270 per sq ft.

How long does a bump-out addition take?

A bump-out addition typically takes 6-10 weeks. The minimum timeline is 3 weeks, and complex projects can run 4 months.

Can I DIY a bump-out addition?

DIY feasibility for a bump-out addition is rated Low to Medium - A small cantilevered bump-out for an experienced DIYer is possible for the finish work, but structural connections, permits, and roofing should involve licensed professionals..

Cost to Bump-Out Addition in Minneapolis, MN (2026)

If you’re budgeting a bump-out addition in Minneapolis, most projects run $10,786-$53,929, 8% above the $22,000 national average. What moves that number most is usually one thing: Foundation Type. On its own it can swing the cost by $0 - $15,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Keep the bump-out to 2 feet or less so it can cantilever off existing framing - this eliminates foundation costs entirely.

$10,786-$53,929 in Minneapolis

8% above the national average · 1.08x cost multiplier

In Minneapolis, a bump-out addition runs $10,786 to $53,929 on average - about 8% above what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Minneapolis

Line Item	Low	Mid	High
Cost per sq ft	$97	$173	$270
Materials	$4,100	$8,713	$18,450
Labor	$6,818	$12,499	$24,998
Permits	$1,230	$2,050	$3,075
Design	$820	$1,537	$3,075
Total	$12,968+8% vs. national avg	$24,799+8% vs. national avg	$49,598+8% vs. national avg

Budget

Small 60-80 sq ft bump-out, cantilevered over existing foundation, no foundation work needed, standard materials matching existing siding.

Mid-Range

100-150 sq ft bump-out with foundation piers or slab extension, mid-grade finishes, energy-efficient windows, basic electrical.

Premium

200+ sq ft bump-out with full concrete foundation, premium materials, custom windows, dedicated heating/cooling, high-end finishes.

Material Options

Material prices below are national averages; availability in Minneapolis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Cantilevered (No New Foundation)	$90-$130 per sq ft	Lowest cost option, no excavation or foundation work, fastest construction	Limited to 2-foot extension maximum in most cases, some structural limitations	Small bathroom, closet, or bay window expansions of 2-3 feet depthLowest cost option, no excavation or foundation work, fastest construction
Concrete Pier Foundation	$110-$160 per sq ft	Good for medium-sized bump-outs, minimal excavation, stable support	Not suitable for very large bump-outs, some areas require frost depth piers	Bump-outs of 3-6 feet depth in moderate climatesGood for medium-sized bump-outs, minimal excavation, stable support
Poured Concrete Slab	$130-$190 per sq ft	Solid, stable, can support any size addition, good for kitchen/dining expansions	Requires excavation and grading, longer construction timeline	Kitchen or family room bump-outs where a durable floor is neededSolid, stable, can support any size addition, good for kitchen/dining expansions
Full Perimeter Foundation	$160-$250 per sq ft	Most stable, allows crawl space access, supports heavy loads and large bump-outs	Most expensive, requires extensive excavation, longest construction timeline	Large bump-outs over 150 sq ft or in areas with challenging soil conditionsMost stable, allows crawl space access, supports heavy loads and large bump-outs

Other Projects in Minneapolis

Furnace Replacement

Attic Insulation

Basement Finishing

Back to national average for Bump-Out Addition

Minneapolis Estimate

Typical Range

$10,786-$53,929

vs. National Average

8% above national

Cost Multiplier

1.08x

Cost Per sq ft

$97-$270

This 1.08x estimate prices Minneapolis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →