Cost to Structured Wiring Installation in Raleigh, NC (2026)
If you’re budgeting a structured wiring installation in Raleigh, most projects run $1,033-$5,166, 14% below the $2,800 national average. What moves that number most is usually one thing: Number of Drops. On its own it can swing the cost by $100 - $400 per drop, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Run cable during any renovation that opens walls - adding ethernet when drywall is already off costs 50-70% less than retrofitting later.
In the Southeast (where Raleigh sits): Good value region; lower labor rates. Strong new construction market in FL, TX, and NC drives volume and competitive pricing.
$1,033-$5,166 in Raleigh
14% below the national average · 0.86x cost multiplier
Homeowners in Raleigh typically spend $1,033-$5,166 on a structured wiring installation, about 14% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Raleigh
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per room/drop | $86 | $215 | $517 |
| Materials | $380 | $950 | $2,375 |
| Labor | $639 | $1,437 | $3,593 |
| Permits | $0 | $190 | $380 |
| Total | $1,019-15% vs. national avg | $2,577-14% vs. national avg | $6,823-14% vs. national avg |
Budget
Basic retrofit: 4-6 ethernet drops, patch panel, simple distribution box
Mid-Range
Full home: 8-12 drops, Cat6 ethernet, coax, patch panel, network closet
Premium
New construction or major renovation: 20+ drops, Cat6A, fiber backbone, AV runs, full distribution
Material Options
Material prices below are national averages; availability in Raleigh may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Cat6 Ethernet (1Gbps Standard) | $0.20-$0.40/ft materials | Most homes - the right choice for any new installationCurrent standard, handles gigabit speeds, backward compatible, widely supported |
| Cat6A Ethernet (10Gbps Future-Proof) | $0.40-$0.60/ft materials | New construction, tech-forward homes, anyone who won't rewire for 20 yearsFull 10Gbps at 100m, ready for faster home speeds, slightly better signal isolation |
| Coaxial Cable (RG-6) | $0.15-$0.30/ft materials | Any home keeping OTA TV or cable; antenna-fed whole-home setupsRequired for cable TV, OTA antenna, and some security cameras |
| Patch Panel + Network Switch | $200-$600 installed | Any structured wiring install - a system without a patch panel isn't structured wiringCentral termination point for all drops, easy troubleshooting, clean management |
| In-Wall HDMI / Keystone | $50-$150 per location installed | TV walls where cords are currently surface-mountedClean wall-plate look for TVs, no surface cables, permanent solution |
Other Projects in Raleigh
Raleigh Estimate
Typical Range
$1,033-$5,166
vs. National Average
14% below national
Cost Multiplier
0.86x
Cost Per room/drop
$86-$517
This 0.86x estimate prices Raleigh labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →