Cost to Structured Wiring Installation in Memphis, TN (2026)
If you’re budgeting a structured wiring installation in Memphis, most projects run $1,069-$5,344, 11% below the $2,800 national average. What moves that number most is usually one thing: Number of Drops. On its own it can swing the cost by $100 - $400 per drop, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Run cable during any renovation that opens walls - adding ethernet when drywall is already off costs 50-70% less than retrofitting later.
In the Southeast (where Memphis sits): Good value region; lower labor rates. Strong new construction market in FL, TX, and NC drives volume and competitive pricing.
$1,069-$5,344 in Memphis
11% below the national average · 0.89x cost multiplier
Expect to pay $1,069-$5,344 for a structured wiring installation in Memphis, about 11% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.
Cost Breakdown in Memphis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per room/drop | $89 | $223 | $534 |
| Materials | $364 | $910 | $2,275 |
| Labor | $702 | $1,578 | $3,946 |
| Permits | $0 | $182 | $364 |
| Total | $1,066-11% vs. national avg | $2,670-11% vs. national avg | $7,040-11% vs. national avg |
Budget
Basic retrofit: 4-6 ethernet drops, patch panel, simple distribution box
Mid-Range
Full home: 8-12 drops, Cat6 ethernet, coax, patch panel, network closet
Premium
New construction or major renovation: 20+ drops, Cat6A, fiber backbone, AV runs, full distribution
Material Options
Material prices below are national averages; availability in Memphis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Cat6 Ethernet (1Gbps Standard) | $0.20-$0.40/ft materials | Most homes - the right choice for any new installationCurrent standard, handles gigabit speeds, backward compatible, widely supported |
| Cat6A Ethernet (10Gbps Future-Proof) | $0.40-$0.60/ft materials | New construction, tech-forward homes, anyone who won't rewire for 20 yearsFull 10Gbps at 100m, ready for faster home speeds, slightly better signal isolation |
| Coaxial Cable (RG-6) | $0.15-$0.30/ft materials | Any home keeping OTA TV or cable; antenna-fed whole-home setupsRequired for cable TV, OTA antenna, and some security cameras |
| Patch Panel + Network Switch | $200-$600 installed | Any structured wiring install - a system without a patch panel isn't structured wiringCentral termination point for all drops, easy troubleshooting, clean management |
| In-Wall HDMI / Keystone | $50-$150 per location installed | TV walls where cords are currently surface-mountedClean wall-plate look for TVs, no surface cables, permanent solution |
Other Projects in Memphis
Memphis Estimate
Typical Range
$1,069-$5,344
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per room/drop
$89-$534
This 0.89x estimate prices Memphis labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →