Cost to Structured Wiring Installation in Jacksonville, FL

$1,092–$5,460 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a structured wiring installation runs $1,092 to $5,460 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line Item	Low	Mid	High
Cost per room/drop	$91	$228	$546
Materials	$364	$910	$2,275
Labor	$728	$1,638	$4,095
Permits	$0	$182	$364
Total	$1,092-9% vs. national avg	$2,730-9% vs. national avg	$7,189-9% vs. national avg

Budget

Basic retrofit: 4-6 ethernet drops, patch panel, simple distribution box

Mid-Range

Full home: 8-12 drops, Cat6 ethernet, coax, patch panel, network closet

Premium

New construction or major renovation: 20+ drops, Cat6A, fiber backbone, AV runs, full distribution

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Cat6 Ethernet (1Gbps Standard)	$0.20-$0.40/ft materials	Current standard, handles gigabit speeds, backward compatible, widely supported	10Gbps limited to 55m runs (still fine for most homes)	Most homes - the right choice for any new installationCurrent standard, handles gigabit speeds, backward compatible, widely supported
Cat6A Ethernet (10Gbps Future-Proof)	$0.40-$0.60/ft materials	Full 10Gbps at 100m, ready for faster home speeds, slightly better signal isolation	Thicker cable, harder to route, modest premium	New construction, tech-forward homes, anyone who won't rewire for 20 yearsFull 10Gbps at 100m, ready for faster home speeds, slightly better signal isolation
Coaxial Cable (RG-6)	$0.15-$0.30/ft materials	Required for cable TV, OTA antenna, and some security cameras	Less needed with streaming but still useful for antenna setups	Any home keeping OTA TV or cable; antenna-fed whole-home setupsRequired for cable TV, OTA antenna, and some security cameras
Patch Panel + Network Switch	$200-$600 installed	Central termination point for all drops, easy troubleshooting, clean management	Requires dedicated space (closet or rack)	Any structured wiring install - a system without a patch panel isn't structured wiringCentral termination point for all drops, easy troubleshooting, clean management
In-Wall HDMI / Keystone	$50-$150 per location installed	Clean wall-plate look for TVs, no surface cables, permanent solution	Fixed length, harder to upgrade, HDMI version becomes outdated	TV walls where cords are currently surface-mountedClean wall-plate look for TVs, no surface cables, permanent solution

Other Projects in Jacksonville

Roof Replacement (Asphalt Shingles)

Full Bathroom Remodel

Back to national average for Structured Wiring Installation

Jacksonville Estimate

Typical Range

$1,092–$5,460

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per room/drop

$91–$546

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →