Cost to Home Network / Structured Wiring in Memphis, TN

$820–$4,920 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $820–$4,920 for a home network / structured wiring in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line Item	Low	Mid	High
Cost per per drop	$82	$164	$492
Materials	$328	$1,230	$2,870
Labor	$246	$984	$2,460
Permits	$0	$0	$0
Total	$574-18% vs. national avg	$2,378-18% vs. national avg	$5,740-18% vs. national avg

Budget

3-4 Cat6 data drops to main living areas, central patch panel, basic wall plates - typical existing home upgrade for better wired connectivity

Mid-Range

8-12 Cat6 drops throughout home, structured media center or network rack, patch panel, wall-mounted access points, coax drops for TVs

Premium

Full structured wiring package - 15-20 Cat6A drops, fiber backbone, enterprise-grade access points (Ubiquiti, Cisco Meraki), security camera wiring, full equipment rack with managed switch

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Cat6 Ethernet (Standard)	$100-$200 per drop installed	Current standard, 1-10 Gbps capability, widely available, backward compatible	Maximum 10 Gbps only over shorter runs (under 55 meters)	Most residential installs - the right choice for nearly every homeCurrent standard, 1-10 Gbps capability, widely available, backward compatible
Cat6A Ethernet (Future-Proof)	$130-$250 per drop installed	Full 10 Gbps over standard 100-meter runs, better noise isolation, more future-proof	Thicker cable harder to bend around corners, marginally higher cost	Homes with long wire runs, tech-focused homeowners, new constructionFull 10 Gbps over standard 100-meter runs, better noise isolation, more future-proof
Fiber Optic (Backbone)	$300-$600 per run	Unlimited bandwidth, immune to electrical interference, ideal for very long runs	Requires media converters or SFP equipment at each end, more complex to terminate	Very large homes, runs over 100 meters, future multi-gigabit ISP connectionsUnlimited bandwidth, immune to electrical interference, ideal for very long runs
MoCA Adapter (Coax-Based Ethernet)	$50-$120 per adapter pair	Uses existing coaxial TV wiring, 2.5 Gbps capable, no new wire runs needed	Requires existing coax at both locations, latency slightly higher than pure Ethernet	Retrofitting wired connections without running new wireUses existing coaxial TV wiring, 2.5 Gbps capable, no new wire runs needed
Wi-Fi Access Point (In-Ceiling or In-Wall)	$150-$600 per AP installed	Delivers excellent wireless coverage when wired to backbone, hidden flush-mount look	Requires a network drop at each AP location, adds to total drop count	Homes where running cable everywhere isn't practical but better Wi-Fi coverage is neededDelivers excellent wireless coverage when wired to backbone, hidden flush-mount look

Other Projects in Memphis

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Home Network / Structured Wiring

Memphis Estimate

Typical Range

$820–$4,920

vs. National Average

18% below national

Cost Multiplier

0.82x

Cost Per per drop

$82–$492

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →