Cost to Home Network / Structured Wiring in Denver, CO (2026)
If you’re budgeting a home network / structured wiring in Denver, most projects run $1,011-$6,069, 1% above the $2,800 national average. What moves that number most is usually one thing: Number of Network Drops. On its own it can swing the cost by $100 - $300 per drop, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Run wire during any open-wall renovation. If you're remodeling a kitchen, adding a bathroom, or replacing drywall, add network drops for $50-$100 each rather than $150-$300 later.
In the Mountain West (where Denver sits): Moderate costs, growing smart home adoption in newer suburban areas.
$1,011-$6,069 in Denver
1% above the national average · 1.01x cost multiplier
Expect to pay $1,011-$6,069 for a home network / structured wiring in Denver, about 1% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.
Cost Breakdown in Denver
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per drop | $101 | $202 | $607 |
| Materials | $424 | $1,590 | $3,710 |
| Labor | $284 | $1,135 | $2,837 |
| Permits | $0 | $0 | $0 |
| Total | $708+1% vs. national avg | $2,937+1% vs. national avg | $7,077+1% vs. national avg |
Budget
3-4 Cat6 data drops to main living areas, central patch panel, basic wall plates - typical existing home upgrade for better wired connectivity
Mid-Range
8-12 Cat6 drops throughout home, structured media center or network rack, patch panel, wall-mounted access points, coax drops for TVs
Premium
Full structured wiring package - 15-20 Cat6A drops, fiber backbone, enterprise-grade access points (Ubiquiti, Cisco Meraki), security camera wiring, full equipment rack with managed switch
Material Options
Material prices below are national averages; availability in Denver may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Cat6 Ethernet (Standard) | $100-$200 per drop installed | Most residential installs - the right choice for nearly every homeCurrent standard, 1-10 Gbps capability, widely available, backward compatible |
| Cat6A Ethernet (Future-Proof) | $130-$250 per drop installed | Homes with long wire runs, tech-focused homeowners, new constructionFull 10 Gbps over standard 100-meter runs, better noise isolation, more future-proof |
| Fiber Optic (Backbone) | $300-$600 per run | Very large homes, runs over 100 meters, future multi-gigabit ISP connectionsUnlimited bandwidth, immune to electrical interference, ideal for very long runs |
| MoCA Adapter (Coax-Based Ethernet) | $50-$120 per adapter pair | Retrofitting wired connections without running new wireUses existing coaxial TV wiring, 2.5 Gbps capable, no new wire runs needed |
| Wi-Fi Access Point (In-Ceiling or In-Wall) | $150-$600 per AP installed | Homes where running cable everywhere isn't practical but better Wi-Fi coverage is neededDelivers excellent wireless coverage when wired to backbone, hidden flush-mount look |
Other Projects in Denver
Denver Estimate
Typical Range
$1,011-$6,069
vs. National Average
1% above national
Cost Multiplier
1.01x
Cost Per per drop
$101-$607
This 1.01x estimate prices Denver labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →