Cost to Water Main Replacement in Salt Lake City, UT (2026)

If you’re budgeting a water main replacement in Salt Lake City, most projects run $1,463-$6,827, 2% below the $3,500 national average. What moves that number most is usually one thing: Length of Water Main. On its own it can swing the cost by $500 - $12,000, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Call 811 before any excavation planning - utility locates are free and their location affects your routing and cost.

$1,463-$6,827 in Salt Lake City

2% below the national average · 0.98x cost multiplier

Homeowners in Salt Lake City typically spend $1,463-$6,827 on a water main replacement, about 2% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line ItemLowMidHigh
Cost per linear ft$49$98$244
Materials$416$936$2,080
Labor$1,127$2,442$4,696
Permits$312$520$832
Total$1,855-2% vs. national avg$3,898-3% vs. national avg$7,608-2% vs. national avg

Budget

Short run under 25 feet from meter to house, simple trenching in soft soil, new PEX or copper supply line.

Mid-Range

50-75 foot run, standard trenching, new copper or PEX pipe, meter reconnection, permit and inspection.

Premium

100+ foot run, difficult access, landscaping or driveway crossing, full trench restoration, concrete or asphalt repair.

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

MaterialCost/UnitBest For
Copper (Type K)$3-$8 per linear ftHomes where longevity and maximum reliability are the priorities50+ year lifespan, approved everywhere, resistant to UV if exposed, proven performance
PEX (Cross-Linked Polyethylene)$0.50-$1.50 per linear ftMost residential water main replacements in moderate climates with code approvalFlexible for easy routing, freeze-resistant, corrosion-proof, fast installation
HDPE (High-Density Polyethylene)$1-$3 per linear ftLong runs and trenchless (directional bore) installationsVery flexible, ideal for directional boring, long lifespan, corrosion-resistant
Galvanized Steel (Replacement Only)N/A - being replaced, not installedNot recommended - this is what is being replaced in most older homesN/A

Other Projects in Salt Lake City

Salt Lake City Estimate

Typical Range

$1,463-$6,827

vs. National Average

2% below national

Cost Multiplier

0.98x

Cost Per linear ft

$49-$244

This 0.98x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →