Cost to Water Main Replacement in Denver, CO

$1,680–$7,840 in Denver

12% above the national average · 1.12x cost multiplier

Expect to pay $1,680–$7,840 for a water main replacement in Denver, about 12% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Cost per linear ft	$56	$112	$280
Materials	$448	$1,008	$2,240
Labor	$1,344	$2,912	$5,600
Permits	$336	$560	$896
Total	$2,128+12% vs. national avg	$4,480+12% vs. national avg	$8,736+12% vs. national avg

Budget

Short run under 25 feet from meter to house, simple trenching in soft soil, new PEX or copper supply line.

Mid-Range

50-75 foot run, standard trenching, new copper or PEX pipe, meter reconnection, permit and inspection.

Premium

100+ foot run, difficult access, landscaping or driveway crossing, full trench restoration, concrete or asphalt repair.

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Copper (Type K)	$3-$8 per linear ft	50+ year lifespan, approved everywhere, resistant to UV if exposed, proven performance	Most expensive material, price fluctuates with commodity markets, requires soldering	Homes where longevity and maximum reliability are the priorities50+ year lifespan, approved everywhere, resistant to UV if exposed, proven performance
PEX (Cross-Linked Polyethylene)	$0.50-$1.50 per linear ft	Flexible for easy routing, freeze-resistant, corrosion-proof, fast installation	Must be UV-protected if exposed, requires specific fittings, not approved in all jurisdictions for underground	Most residential water main replacements in moderate climates with code approvalFlexible for easy routing, freeze-resistant, corrosion-proof, fast installation
HDPE (High-Density Polyethylene)	$1-$3 per linear ft	Very flexible, ideal for directional boring, long lifespan, corrosion-resistant	Requires heat fusion or mechanical fittings, less common for residential than commercial	Long runs and trenchless (directional bore) installationsVery flexible, ideal for directional boring, long lifespan, corrosion-resistant
Galvanized Steel (Replacement Only)	N/A - being replaced, not installed	N/A	Prone to corrosion and buildup, commonly the cause of replacement, restricted water flow over time	Not recommended - this is what is being replaced in most older homesN/A

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Water Main Replacement

Denver Estimate

Typical Range

$1,680–$7,840

vs. National Average

12% above national

Cost Multiplier

1.12x

Cost Per linear ft

$56–$280

Estimates apply Denver's 1.12x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →