Cost to Sump Pump Installation in Denver, CO

$672–$2,800 in Denver

12% above the national average · 1.12x cost multiplier

Expect to pay $672–$2,800 for a sump pump installation in Denver, about 12% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Cost per unit	$672	$1344	$2800
Materials	$224	$504	$1,120
Labor	$392	$728	$1,232
Permits	$56	$84	$112
Total	$672+12% vs. national avg	$1,316+12% vs. national avg	$2,688+12% vs. national avg

Budget

Basic pedestal sump pump (1/3 HP), existing sump pit, simple discharge line to exterior, no battery backup

Mid-Range

Submersible sump pump (1/2 HP), new sump pit if needed, PVC discharge line with check valve, basic battery backup

Premium

High-capacity submersible pump (3/4 HP), cast iron construction, battery backup system, water alarm, buried discharge line with freeze guard

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Pedestal Sump Pump	$60 - $150 for the pump	Cheapest option, motor stays above water so it's easier to service, good for shallow pits	Louder, less powerful, shorter lifespan (5-8 years), motor is visible and takes up space	Homes with occasional minor seepage, tight budgets, shallow existing sump pitsCheapest option, motor stays above water so it's easier to service, good for shallow pits
Submersible Sump Pump (Plastic)	$100 - $250 for the pump	Quiet operation, out of sight in the pit, handles higher water volumes, sealed motor	Harder to service, plastic housing can crack, shorter life than cast iron (7-10 years)	Most standard residential installations, moderate water tablesQuiet operation, out of sight in the pit, handles higher water volumes, sealed motor
Submersible Sump Pump (Cast Iron)	$200 - $400 for the pump	Very durable (10-15 year lifespan), better heat dissipation, handles debris better, quieter	Heavier, more expensive upfront, requires a deeper pit	High water table areas, homes with frequent pump cycling, long-term reliabilityVery durable (10-15 year lifespan), better heat dissipation, handles debris better, quieter
Battery Backup Sump Pump	$200 - $600 for the backup unit	Protects against power outages, runs automatically when primary pump fails, peace of mind	Batteries need replacement every 3-5 years ($100-$200), adds complexity, takes up pit space	Areas with frequent storms and power outages, finished basements, anyone who can't afford floodingProtects against power outages, runs automatically when primary pump fails, peace of mind
Water-Powered Backup Pump	$300 - $800 for the unit	Runs indefinitely during outages (no battery), no maintenance, very reliable	Requires municipal water supply, uses water (adds to water bill), slower pumping rate, not available on wells	Homes with municipal water, extended power outage risk, homeowners who want zero-maintenance backupRuns indefinitely during outages (no battery), no maintenance, very reliable

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Sump Pump Installation

Denver Estimate

Typical Range

$672–$2,800

vs. National Average

12% above national

Cost Multiplier

1.12x

Cost Per unit

$672–$2800

Estimates apply Denver's 1.12x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →