Cost to Shower Valve Replacement in Denver, CO

$392–$896 in Denver

12% above the national average · 1.12x cost multiplier

Expect to pay $392–$896 for a shower valve replacement in Denver, about 12% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Materials	$84	$196	$448
Labor	$224	$392	$672
Permits	$0	$0	$56
Total	$308+12% vs. national avg	$588+12% vs. national avg	$1,176+12% vs. national avg

Budget

Standard pressure-balance valve swap with access from behind the wall or through an access panel. Reusing existing trim.

Mid-Range

New pressure-balance valve with updated trim kit, tile cut for access, and wall repair/patching.

Premium

Thermostatic valve upgrade with diverter, premium trim, tile removal and replacement, and full wall restoration.

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Cartridge Replacement Only	$20-$50	Cheapest fix if the valve body is in good condition, no wall cutting needed	Only works if the valve body itself isn't corroded or damaged	Valves that drip or don't mix temperature properly but the body is still soundCheapest fix if the valve body is in good condition, no wall cutting needed
Pressure-Balance Valve	$50-$150	Prevents temperature spikes when toilets flush, code-required in most areas, reliable	Doesn't allow independent volume and temperature control	Standard shower valve replacements and code compliance upgradesPrevents temperature spikes when toilets flush, code-required in most areas, reliable
Thermostatic Valve	$200-$400	Precise temperature control, maintains set temperature regardless of pressure changes, luxury feel	More expensive, more complex installation, requires specific rough-in	Upscale shower remodels and multi-head shower systemsPrecise temperature control, maintains set temperature regardless of pressure changes, luxury feel
Thermostatic with Diverter	$300-$600	Controls temperature and switches between multiple shower heads, spa-like functionality	Most expensive option, requires additional rough-in, complex installation	Multi-head shower systems with rain head, body sprays, and handheldControls temperature and switches between multiple shower heads, spa-like functionality

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Shower Valve Replacement

Denver Estimate

Typical Range

$392–$896

vs. National Average

12% above national

Cost Multiplier

1.12x

Estimates apply Denver's 1.12x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →