How much does a pipe insulation cost in Salt Lake City?

A pipe insulation in Salt Lake City typically costs $195-$877, 3% below the $500 national average.

What is the cost per linear ft for a pipe insulation in Salt Lake City?

Pipe Insulation in Salt Lake City typically costs $2-$8 per linear ft.

How long does a pipe insulation take?

A pipe insulation typically takes 2-4 hours. The minimum timeline is 1 hour, and complex projects can run 1 day.

Can I DIY a pipe insulation?

DIY feasibility for a pipe insulation is rated Easy.

Cost to Pipe Insulation in Salt Lake City, UT (2026)

If you’re budgeting a pipe insulation in Salt Lake City, most projects run $195-$877, 3% below the $500 national average. What moves that number most is usually one thing: Linear Footage of Pipe. On its own it can swing the cost by $50 - $800, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Do it yourself with foam tube insulation - it's snap-on easy and saves $100-$500 in labor.

In the Mountain West (where Salt Lake City sits): Growing demand in cold mountain areas.

$195-$877 in Salt Lake City

3% below the national average · 0.97x cost multiplier

Homeowners in Salt Lake City typically spend $195-$877 on a pipe insulation, about 3% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line Item	Low	Mid	High
Cost per linear ft	$2	$4	$8
Materials	$52	$156	$416
Labor	$94	$282	$657
Permits	$0	$0	$0
Total	$146-3% vs. national avg	$438-3% vs. national avg	$1,073-2% vs. national avg

Budget

Foam tube insulation on easily accessible exposed pipes in a small area (25-50 linear feet). Basic self-seal foam sleeves.

Mid-Range

Foam or fiberglass insulation on 75-150 linear feet of pipe in basement, crawl space, and attic. Includes fittings and elbows.

Premium

Full-house pipe insulation (200+ linear feet) including hard-to-reach areas, fiberglass with vapor barrier, and heat tape on vulnerable exterior wall pipes.

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Self-Seal Foam Tubes	$0.50-$1.50/linear ft	Cheapest option, easy DIY installation, pre-slit for snap-on application	Lower R-value, can degrade in UV light, not ideal for extreme cold	Accessible basement and utility room pipes in moderate climatesCheapest option, easy DIY installation, pre-slit for snap-on application
Fiberglass Pipe Wrap	$1-$3/linear ft	Higher R-value, fire resistant, works on irregular fittings and elbows	Requires gloves and care during installation (fibers irritate skin), needs vapor barrier in humid areas	Hot water pipes and areas where fire resistance mattersHigher R-value, fire resistant, works on irregular fittings and elbows
Closed-Cell Rubber (Armaflex)	$2-$5/linear ft	Excellent thermal performance, built-in vapor barrier, flexible and durable, UV resistant	Most expensive insulation material, requires adhesive for seams	Condensation-prone cold water pipes and professional installationsExcellent thermal performance, built-in vapor barrier, flexible and durable, UV resistant
Heat Tape + Insulation	$5-$12/linear ft	Actively prevents freezing, thermostatically controlled, essential for vulnerable pipes	Uses electricity, needs outlet nearby, must be monitored for malfunction	Pipes in exterior walls, unheated garages, and freeze-prone crawl spacesActively prevents freezing, thermostatically controlled, essential for vulnerable pipes

Other Projects in Salt Lake City

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Pipe Insulation

Salt Lake City Estimate

Typical Range

$195-$877

vs. National Average

3% below national

Cost Multiplier

0.97x

Cost Per linear ft

$2-$8

This 0.97x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →