Cost to Pipe Insulation in Boise, ID

$210–$945 in Boise

5% above the national average · 1.05x cost multiplier

Expect to pay $210–$945 for a pipe insulation in Boise, about 5% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Boise prices.

Cost Breakdown in Boise

Line Item	Low	Mid	High
Cost per linear ft	$2	$4	$8
Materials	$53	$158	$420
Labor	$105	$315	$735
Permits	$0	$0	$0
Total	$158+5% vs. national avg	$473+5% vs. national avg	$1,155+5% vs. national avg

Budget

Foam tube insulation on easily accessible exposed pipes in a small area (25-50 linear feet). Basic self-seal foam sleeves.

Mid-Range

Foam or fiberglass insulation on 75-150 linear feet of pipe in basement, crawl space, and attic. Includes fittings and elbows.

Premium

Full-house pipe insulation (200+ linear feet) including hard-to-reach areas, fiberglass with vapor barrier, and heat tape on vulnerable exterior wall pipes.

Material Options

Material prices below are national averages; availability in Boise may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Self-Seal Foam Tubes	$0.50-$1.50/linear ft	Cheapest option, easy DIY installation, pre-slit for snap-on application	Lower R-value, can degrade in UV light, not ideal for extreme cold	Accessible basement and utility room pipes in moderate climatesCheapest option, easy DIY installation, pre-slit for snap-on application
Fiberglass Pipe Wrap	$1-$3/linear ft	Higher R-value, fire resistant, works on irregular fittings and elbows	Requires gloves and care during installation (fibers irritate skin), needs vapor barrier in humid areas	Hot water pipes and areas where fire resistance mattersHigher R-value, fire resistant, works on irregular fittings and elbows
Closed-Cell Rubber (Armaflex)	$2-$5/linear ft	Excellent thermal performance, built-in vapor barrier, flexible and durable, UV resistant	Most expensive insulation material, requires adhesive for seams	Condensation-prone cold water pipes and professional installationsExcellent thermal performance, built-in vapor barrier, flexible and durable, UV resistant
Heat Tape + Insulation	$5-$12/linear ft	Actively prevents freezing, thermostatically controlled, essential for vulnerable pipes	Uses electricity, needs outlet nearby, must be monitored for malfunction	Pipes in exterior walls, unheated garages, and freeze-prone crawl spacesActively prevents freezing, thermostatically controlled, essential for vulnerable pipes

Other Projects in Boise

Composite Deck Building

Full Kitchen Remodel

Central AC Installation

Back to national average for Pipe Insulation

Boise Estimate

Typical Range

$210–$945

vs. National Average

5% above national

Cost Multiplier

1.05x

Cost Per linear ft

$2–$8

Estimates apply Boise's 1.05x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →