Cost to Outdoor Faucet / Spigot Installation in San Antonio, TX (2026)
If you’re budgeting a outdoor faucet / spigot installation in San Antonio, most projects run $128-$427, 15% below the $300 national average. What moves that number most is usually one thing: New Installation vs. Replacement. On its own it can swing the cost by $50 - $250, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: In cold climates, always use a frost-free hose bib - the $30-$50 extra versus a standard bib is cheap insurance against a $200-$800 freeze and burst pipe repair.
$128-$427 in San Antonio
15% below the national average · 0.85x cost multiplier
Expect to pay $128-$427 for a outdoor faucet / spigot installation in San Antonio, about 15% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at San Antonio prices.
Cost Breakdown in San Antonio
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per faucet installed | $128 | $256 | $427 |
| Materials | $38 | $76 | $142 |
| Labor | $80 | $161 | $321 |
| Permits | $0 | $47 | $71 |
| Total | $118-16% vs. national avg | $284-14% vs. national avg | $534-15% vs. national avg |
Budget
Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.
Mid-Range
New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.
Premium
Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.
Material Options
Material prices below are national averages; availability in San Antonio may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Frost-Free Hose Bib (Anti-Siphon) | $30-$80 each | Any climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation |
| Standard Brass Hose Bib | $15-$35 each | Warm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace |
| Ball Valve Sillcock (Lockable) | $40-$90 each | Vacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable |
| Yard Hydrant (Deep Burial) | $150-$350 each installed | Large yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use |
Other Projects in San Antonio
San Antonio Estimate
Typical Range
$128-$427
vs. National Average
15% below national
Cost Multiplier
0.85x
Cost Per per faucet installed
$128-$427
This 0.85x estimate prices San Antonio labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →