Cost to Outdoor Faucet / Spigot Installation in Richmond, VA (2026)
If you’re budgeting a outdoor faucet / spigot installation in Richmond, most projects run $133-$444, 11% below the $300 national average. What moves that number most is usually one thing: New Installation vs. Replacement. On its own it can swing the cost by $50 - $250, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: In cold climates, always use a frost-free hose bib - the $30-$50 extra versus a standard bib is cheap insurance against a $200-$800 freeze and burst pipe repair.
$133-$444 in Richmond
11% below the national average · 0.89x cost multiplier
Homeowners in Richmond typically spend $133-$444 on a outdoor faucet / spigot installation, about 11% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Richmond
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per faucet installed | $133 | $266 | $444 |
| Materials | $39 | $77 | $145 |
| Labor | $84 | $169 | $338 |
| Permits | $0 | $48 | $72 |
| Total | $123-12% vs. national avg | $294-11% vs. national avg | $555-11% vs. national avg |
Budget
Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.
Mid-Range
New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.
Premium
Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.
Material Options
Material prices below are national averages; availability in Richmond may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Frost-Free Hose Bib (Anti-Siphon) | $30-$80 each | Any climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation |
| Standard Brass Hose Bib | $15-$35 each | Warm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace |
| Ball Valve Sillcock (Lockable) | $40-$90 each | Vacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable |
| Yard Hydrant (Deep Burial) | $150-$350 each installed | Large yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use |
Other Projects in Richmond
Richmond Estimate
Typical Range
$133-$444
vs. National Average
11% below national
Cost Multiplier
0.89x
Cost Per per faucet installed
$133-$444
This 0.89x estimate prices Richmond labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →