Cost to Outdoor Faucet / Spigot Installation in Raleigh, NC (2026)

If you’re budgeting a outdoor faucet / spigot installation in Raleigh, most projects run $132-$438, 12% below the $300 national average. What moves that number most is usually one thing: New Installation vs. Replacement. On its own it can swing the cost by $50 - $250, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: In cold climates, always use a frost-free hose bib - the $30-$50 extra versus a standard bib is cheap insurance against a $200-$800 freeze and burst pipe repair.

$132-$438 in Raleigh

12% below the national average · 0.88x cost multiplier

Homeowners in Raleigh typically spend $132-$438 on a outdoor faucet / spigot installation, about 12% below the national average. Labor rates and contractor availability in the Southeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Raleigh

Line ItemLowMidHigh
Cost per per faucet installed$132$263$438
Materials$38$76$143
Labor$84$167$334
Permits$0$48$71
Total$122-13% vs. national avg$291-12% vs. national avg$548-12% vs. national avg

Budget

Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.

Mid-Range

New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.

Premium

Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.

Material Options

Material prices below are national averages; availability in Raleigh may shift costs slightly.

MaterialCost/UnitBest For
Frost-Free Hose Bib (Anti-Siphon)$30-$80 eachAny climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation
Standard Brass Hose Bib$15-$35 eachWarm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace
Ball Valve Sillcock (Lockable)$40-$90 eachVacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable
Yard Hydrant (Deep Burial)$150-$350 each installedLarge yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use

Other Projects in Raleigh

Raleigh Estimate

Typical Range

$132-$438

vs. National Average

12% below national

Cost Multiplier

0.88x

Cost Per per faucet installed

$132-$438

This 0.88x estimate prices Raleigh labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →