Cost to Outdoor Faucet / Spigot Installation in New York City, NY

$213$710 in New York City

42% above the national average · 1.42x cost multiplier

Homeowners in New York City typically spend $213–$710 on a outdoor faucet / spigot installation, about 42% above the national average. Labor rates and contractor availability in the Northeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in New York City

Line ItemLowMidHigh
Cost per per faucet installed$213$426$710
Materials$57$114$213
Labor$142$284$568
Permits$0$71$107
Total$199+42% vs. national avg$469+42% vs. national avg$888+42% vs. national avg

Budget

Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.

Mid-Range

New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.

Premium

Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.

Material Options

Material prices below are national averages; availability in New York City may shift costs slightly.

MaterialCost/UnitBest For
Frost-Free Hose Bib (Anti-Siphon)$30-$80 eachAny climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation
Standard Brass Hose Bib$15-$35 eachWarm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace
Ball Valve Sillcock (Lockable)$40-$90 eachVacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable
Yard Hydrant (Deep Burial)$150-$350 each installedLarge yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use

Other Projects in New York City

New York City Estimate

Typical Range

$213$710

vs. National Average

42% above national

Cost Multiplier

1.42x

Cost Per per faucet installed

$213–$710

Estimates apply New York City's 1.42x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →