Cost to Outdoor Faucet / Spigot Installation in Houston, TX (2026)

If you’re budgeting a outdoor faucet / spigot installation in Houston, most projects run $137-$456, 9% below the $300 national average. What moves that number most is usually one thing: New Installation vs. Replacement. On its own it can swing the cost by $50 - $250, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: In cold climates, always use a frost-free hose bib - the $30-$50 extra versus a standard bib is cheap insurance against a $200-$800 freeze and burst pipe repair.

$137-$456 in Houston

9% below the national average · 0.91x cost multiplier

In Houston, a outdoor faucet / spigot installation runs $137 to $456 on average - about 9% below what homeowners pay nationwide. The South market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Houston

Line ItemLowMidHigh
Cost per per faucet installed$137$274$456
Materials$38$77$144
Labor$88$177$354
Permits$0$48$72
Total$126-10% vs. national avg$302-8% vs. national avg$570-9% vs. national avg

Budget

Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.

Mid-Range

New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.

Premium

Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.

Material Options

Material prices below are national averages; availability in Houston may shift costs slightly.

MaterialCost/UnitBest For
Frost-Free Hose Bib (Anti-Siphon)$30-$80 eachAny climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation
Standard Brass Hose Bib$15-$35 eachWarm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace
Ball Valve Sillcock (Lockable)$40-$90 eachVacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable
Yard Hydrant (Deep Burial)$150-$350 each installedLarge yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use

Other Projects in Houston

Houston Estimate

Typical Range

$137-$456

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per per faucet installed

$137-$456

This 0.91x estimate prices Houston labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →