Cost to Outdoor Faucet / Spigot Installation in Dallas, TX (2026)
If you’re budgeting a outdoor faucet / spigot installation in Dallas, most projects run $135-$450, 10% below the $300 national average. What moves that number most is usually one thing: New Installation vs. Replacement. On its own it can swing the cost by $50 - $250, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: In cold climates, always use a frost-free hose bib - the $30-$50 extra versus a standard bib is cheap insurance against a $200-$800 freeze and burst pipe repair.
$135-$450 in Dallas
10% below the national average · 0.90x cost multiplier
In Dallas, a outdoor faucet / spigot installation runs $135 to $450 on average - about 10% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Dallas
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per faucet installed | $135 | $270 | $450 |
| Materials | $39 | $77 | $145 |
| Labor | $86 | $173 | $345 |
| Permits | $0 | $48 | $72 |
| Total | $125-11% vs. national avg | $298-10% vs. national avg | $562-10% vs. national avg |
Budget
Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.
Mid-Range
New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.
Premium
Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.
Material Options
Material prices below are national averages; availability in Dallas may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Frost-Free Hose Bib (Anti-Siphon) | $30-$80 each | Any climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation |
| Standard Brass Hose Bib | $15-$35 each | Warm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace |
| Ball Valve Sillcock (Lockable) | $40-$90 each | Vacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable |
| Yard Hydrant (Deep Burial) | $150-$350 each installed | Large yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use |
Other Projects in Dallas
Dallas Estimate
Typical Range
$135-$450
vs. National Average
10% below national
Cost Multiplier
0.90x
Cost Per per faucet installed
$135-$450
This 0.90x estimate prices Dallas labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →