Cost to Outdoor Faucet / Spigot Installation in Cleveland, OH

$129–$430 in Cleveland

14% below the national average · 0.86x cost multiplier

Homeowners in Cleveland typically spend $129–$430 on a outdoor faucet / spigot installation, about 14% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Cleveland

Line Item	Low	Mid	High
Cost per per faucet installed	$129	$258	$430
Materials	$34	$69	$129
Labor	$86	$172	$344
Permits	$0	$43	$65
Total	$120-14% vs. national avg	$284-14% vs. national avg	$538-14% vs. national avg

Budget

Basic frost-free hose bib replacing existing faucet at same location, no new piping run required.

Mid-Range

New frost-free hose bib at new location, 10-20 foot supply run through wall to existing cold water line, backflow preventer.

Premium

Two outdoor faucets with dedicated shutoffs, long supply runs, custom mounting through masonry or stucco exterior, yard hydrant for irrigation area.

Material Options

Material prices below are national averages; availability in Cleveland may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
Frost-Free Hose Bib (Anti-Siphon)	$30-$80 each	Self-draining, freeze-resistant, built-in anti-backflow protection, standard installation	Requires minimum 6-8 inch wall depth for stem, slightly more expensive than basic hose bibs	Any climate with winter temperatures at or below 32°F - the clear default choiceSelf-draining, freeze-resistant, built-in anti-backflow protection, standard installation
Standard Brass Hose Bib	$15-$35 each	Simple, inexpensive, easy to replace	Must be manually shut off and drained before freezing temperatures, freeze damage risk	Warm climates (Florida, Hawaii, Southern California) where freezing is not a concernSimple, inexpensive, easy to replace
Ball Valve Sillcock (Lockable)	$40-$90 each	Tamper-resistant lock option for security, quarter-turn operation, very durable	Slightly more expensive, not all versions are frost-free	Vacation properties, rental units, or anywhere unauthorized water use is a concernTamper-resistant lock option for security, quarter-turn operation, very durable
Yard Hydrant (Deep Burial)	$150-$350 each installed	Provides water access away from the house, self-draining, handles heavy irrigation use	Requires trenching for supply line, taller and more visible, higher installation cost	Large yards, garden areas, or barns where a faucet near the house is not convenientProvides water access away from the house, self-draining, handles heavy irrigation use

Other Projects in Cleveland

Full Kitchen Remodel

Basement Finishing

Roof Replacement (Asphalt Shingles)

Back to national average for Outdoor Faucet / Spigot Installation

Cleveland Estimate

Typical Range

$129–$430

vs. National Average

14% below national

Cost Multiplier

0.86x

Cost Per per faucet installed

$129–$430

Estimates apply Cleveland's 0.86x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →