Cost to Main Water Shut-Off Valve Replacement in Salt Lake City, UT (2026)
If you’re budgeting a main water shut-off valve replacement in Salt Lake City, most projects run $170-$583, 3% below the $375 national average. What moves that number most is usually one thing: Valve Type Being Replaced. On its own it can swing the cost by $50 - $300, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Replace all seized secondary shutoff valves (water heater, toilets, sinks) while the main shutoff is off. The marginal cost per valve is $50-$100 and saves multiple future service calls.
$170-$583 in Salt Lake City
3% below the national average · 0.97x cost multiplier
Homeowners in Salt Lake City typically spend $170-$583 on a main water shut-off valve replacement, about 3% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Salt Lake City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per per valve replaced | $170 | $365 | $583 |
| Materials | $42 | $83 | $156 |
| Labor | $113 | $235 | $470 |
| Permits | $0 | $52 | $104 |
| Total | $155-3% vs. national avg | $370-3% vs. national avg | $730-3% vs. national avg |
Budget
Simple ball valve replacement on accessible copper or PEX supply, no complications, requires utility shutoff at meter.
Mid-Range
Gate to ball valve upgrade on typical installation, some access difficulty, utility coordination for meter shutoff, standard restoration.
Premium
Complex installation with difficult access, lead or galvanized pipe requiring section replacement, multiple valve upgrades, drywall or floor access.
Material Options
Material prices below are national averages; availability in Salt Lake City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Full-Port Ball Valve (Brass) | $15-$50 each | Main water shutoff - the gold standard for new residential shutoff valve installationsMost reliable, quarter-turn operation, durable brass body, full-port allows unrestricted flow |
| Ball Valve with Integral Pressure Regulator | $80-$200 each | Homes with high municipal water pressure (above 80 PSI) where a pressure reducing valve is needed anywayCombines shutoff and pressure regulation in one unit, simplifies installation, protects downstream fixtures |
| Ball Valve with Flow Meter | $60-$150 each | Tech-savvy homeowners who want leak detection and consumption monitoringMonitors water consumption, can detect leak events via connected app, shutoff capability |
| Automated Smart Water Shutoff Valve | $200-$600 equipment plus labor | Vacation properties, second homes, or homeowners with a history of plumbing leaks or high-value finishes to protectAutomatically shuts off water when leak sensor detects water, can be controlled remotely, insurance premium discounts possible |
Other Projects in Salt Lake City
Salt Lake City Estimate
Typical Range
$170-$583
vs. National Average
3% below national
Cost Multiplier
0.97x
Cost Per per valve replaced
$170-$583
This 0.97x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →