Cost to Gas Line Installation in Salt Lake City, UT (2026)
If you’re budgeting a gas line installation in Salt Lake City, most projects run $197-$984, 2% below the $550 national average. What moves that number most is usually one thing: Run Length and Routing. On its own it can swing the cost by $100 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Plan all your gas line additions in one project. Adding a second or third drop while the plumber is already mobilized costs far less than separate trips.
$197-$984 in Salt Lake City
2% below the national average · 0.98x cost multiplier
Homeowners in Salt Lake City typically spend $197-$984 on a gas line installation, about 2% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Salt Lake City
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $15 | $30 | $69 |
| Materials | $83 | $208 | $624 |
| Labor | $169 | $376 | $1,127 |
| Permits | $104 | $156 | $312 |
| Total | $356-1% vs. national avg | $740-1% vs. national avg | $2,063-2% vs. national avg |
Budget
Short run (10-15 ft) from existing supply to new appliance (dryer, stove, fireplace), accessible location, black iron pipe.
Mid-Range
25-35 foot run through wall or floor to new appliance, CSST flexible tubing, gas shutoff at appliance, tested and inspected.
Premium
60-100 foot run from meter or main supply, multiple drops for new appliances, outdoor gas line for grill or firepit, bonding and inspection.
Material Options
Material prices below are national averages; availability in Salt Lake City may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Black Iron Pipe (Schedule 40) | $1-$3 per linear ft materials | Short exposed runs, appliance connections, and jurisdictions with CSST restrictionsApproved everywhere, extremely durable, not affected by bonding requirements, inexpensive material |
| CSST (Corrugated Stainless Steel Tubing) | $2-$5 per linear ft materials | New construction and remodeling work where long flexible runs are needed - now the most common residential methodFlexible, fast installation, fewer fittings needed, runs through walls easily, resistant to movement and vibration |
| Copper (Type K or L) | $3-$8 per linear ft materials | LP propane applications in specific jurisdictions - check local code before specifyingApproved in some jurisdictions, good for LP gas in some applications |
| PE Pipe (Underground Only) | $1-$3 per linear ft materials | Outdoor underground gas runs to outbuildings, outdoor kitchens, pool heaters, and generatorsRequired for most underground residential gas runs, flexible, corrosion-resistant |
Other Projects in Salt Lake City
Salt Lake City Estimate
Typical Range
$197-$984
vs. National Average
2% below national
Cost Multiplier
0.98x
Cost Per linear ft
$15-$69
This 0.98x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →