Cost to Gas Line Installation in Columbus, OH (2026)
If you’re budgeting a gas line installation in Columbus, most projects run $190-$950, 5% below the $550 national average. What moves that number most is usually one thing: Run Length and Routing. On its own it can swing the cost by $100 - $3,000, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Plan all your gas line additions in one project. Adding a second or third drop while the plumber is already mobilized costs far less than separate trips.
$190-$950 in Columbus
5% below the national average · 0.95x cost multiplier
In Columbus, a gas line installation runs $190 to $950 on average - about 5% below what homeowners pay nationwide. The Midwest market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.
Cost Breakdown in Columbus
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per linear ft | $14 | $28 | $66 |
| Materials | $75 | $188 | $564 |
| Labor | $172 | $383 | $1,150 |
| Permits | $94 | $141 | $282 |
| Total | $341-5% vs. national avg | $712-5% vs. national avg | $1,996-5% vs. national avg |
Budget
Short run (10-15 ft) from existing supply to new appliance (dryer, stove, fireplace), accessible location, black iron pipe.
Mid-Range
25-35 foot run through wall or floor to new appliance, CSST flexible tubing, gas shutoff at appliance, tested and inspected.
Premium
60-100 foot run from meter or main supply, multiple drops for new appliances, outdoor gas line for grill or firepit, bonding and inspection.
Material Options
Material prices below are national averages; availability in Columbus may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Black Iron Pipe (Schedule 40) | $1-$3 per linear ft materials | Short exposed runs, appliance connections, and jurisdictions with CSST restrictionsApproved everywhere, extremely durable, not affected by bonding requirements, inexpensive material |
| CSST (Corrugated Stainless Steel Tubing) | $2-$5 per linear ft materials | New construction and remodeling work where long flexible runs are needed - now the most common residential methodFlexible, fast installation, fewer fittings needed, runs through walls easily, resistant to movement and vibration |
| Copper (Type K or L) | $3-$8 per linear ft materials | LP propane applications in specific jurisdictions - check local code before specifyingApproved in some jurisdictions, good for LP gas in some applications |
| PE Pipe (Underground Only) | $1-$3 per linear ft materials | Outdoor underground gas runs to outbuildings, outdoor kitchens, pool heaters, and generatorsRequired for most underground residential gas runs, flexible, corrosion-resistant |
Other Projects in Columbus
Columbus Estimate
Typical Range
$190-$950
vs. National Average
5% below national
Cost Multiplier
0.95x
Cost Per linear ft
$14-$66
This 0.95x estimate prices Columbus labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →