How much does a wainscoting and board and batten installation cost in Salt Lake City?

A wainscoting and board and batten installation in Salt Lake City typically costs $972-$4,861, 3% below the $2,500 national average.

What is the cost per linear ft for a wainscoting and board and batten installation in Salt Lake City?

Wainscoting and Board and Batten Installation in Salt Lake City typically costs $7-$24 per linear ft.

How long does a wainscoting and board and batten installation take?

A wainscoting and board and batten installation typically takes 2-4 days. The minimum timeline is 1-2 days, and complex projects can run 5-7 days.

Can I DIY a wainscoting and board and batten installation?

DIY feasibility for a wainscoting and board and batten installation is rated Moderate to High - Board and batten is one of the most DIY-friendly wall treatments and has become a hugely popular weekend project. Shaker-style flat panels are also very doable. Raised panel wainscoting is significantly harder and usually best left to a finish carpenter..

Cost to Wainscoting and Board and Batten Installation in Salt Lake City, UT (2026)

If you’re budgeting a wainscoting and board and batten installation in Salt Lake City, most projects run $972-$4,861, 3% below the $2,500 national average. What moves that number most is usually one thing: Wainscoting Style. On its own it can swing the cost by $3 - $15 per linear foot, so that’s the decision to slow down on before you sweat the smaller stuff.

Easiest place to save: Board and batten is the cheapest style to install and one of the most popular looks right now. You get high visual impact for roughly half the cost of raised panel wainscoting.

In the Mountain West (where Salt Lake City sits): Growing renovation market in resort and suburban areas has moderately pushed trim carpentry rates above average.

$972-$4,861 in Salt Lake City

3% below the national average · 0.97x cost multiplier

Homeowners in Salt Lake City typically spend $972-$4,861 on a wainscoting and board and batten installation, about 3% below the national average. Labor rates and contractor availability in the Mountain West region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in Salt Lake City

Line Item	Low	Mid	High
Cost per linear ft	$7	$15	$24
Materials	$416	$936	$2,288
Labor	$499	$1,179	$2,267
Permits	$0	$0	$0
Total	$915-4% vs. national avg	$2,323-3% vs. national avg	$5,075-2% vs. national avg

Budget

MDF board and batten style, simple vertical battens on flat panels, one room (about 50 linear feet), paint-grade finish

Mid-Range

Raised panel or shaker-style wainscoting in pine or poplar, 2-3 rooms (about 120 linear feet), chair rail cap, professional painting

Premium

Custom hardwood raised panel wainscoting, full room installations, stain-grade finish, ornate chair rail and base cap profiles

Material Options

Material prices below are national averages; availability in Salt Lake City may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
MDF Panels and Battens	$2 - $4 per linear foot	Smooth surface, no grain to bleed through paint, consistent quality, affordable, won't warp	Can swell with moisture, heavier than solid wood, not suitable for bathrooms, can't be stained	Paint-grade board and batten or shaker-style installations in dry roomsSmooth surface, no grain to bleed through paint, consistent quality, affordable, won't warp
Pine or Poplar	$3 - $6 per linear foot	Real wood, takes paint well, can be stained (with conditioning), relatively affordable, lightweight	Pine dents easily, poplar has greenish undertones, both are soft woods prone to nicks from daily use	Mid-range installations, traditional homes, either paint or light stain finishesReal wood, takes paint well, can be stained (with conditioning), relatively affordable, lightweight
Oak or Maple	$6 - $12 per linear foot	Hard and durable, beautiful grain for stain-grade work, classic appearance, adds home value	Expensive, heavier, requires pre-drilling for nails, open grain (oak) needs filler for smooth finish	Stain-grade raised panel wainscoting, formal dining rooms, high-end home renovationsHard and durable, beautiful grain for stain-grade work, classic appearance, adds home value
PVC/Cellular PVC	$5 - $9 per linear foot	Completely waterproof, won't rot or swell, paintable, ideal for wet areas, insect-proof	More expensive than MDF, can expand with heat, limited to paint finish (can't stain), slightly different feel than wood	Bathrooms, mudrooms, laundry rooms, below-grade installations, any high-moisture environmentCompletely waterproof, won't rot or swell, paintable, ideal for wet areas, insect-proof
Pre-Made Wainscoting Kits	$8 - $15 per linear foot	Includes all components, consistent sizing, often includes chair rail and base, good for DIY	Limited style options, may not fit non-standard wall heights, premium pricing for convenience	DIY homeowners, single-room projects, anyone who wants a simplified installation processIncludes all components, consistent sizing, often includes chair rail and base, good for DIY

Other Projects in Salt Lake City

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Wainscoting and Board and Batten Installation

Salt Lake City Estimate

Typical Range

$972-$4,861

vs. National Average

3% below national

Cost Multiplier

0.97x

Cost Per linear ft

$7-$24

This 0.97x estimate prices Salt Lake City labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.

See national average costs →