Cost to Wainscoting and Board and Batten Installation in Denver, CO

$1,120–$5,600 in Denver

12% above the national average · 1.12x cost multiplier

Expect to pay $1,120–$5,600 for a wainscoting and board and batten installation in Denver, about 12% above the national benchmark. The Mountain West region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Denver prices.

Cost Breakdown in Denver

Line Item	Low	Mid	High
Cost per linear ft	$8	$17	$28
Materials	$448	$1,008	$2,464
Labor	$616	$1,456	$2,800
Permits	$0	$0	$0
Total	$1,064+12% vs. national avg	$2,688+12% vs. national avg	$5,824+12% vs. national avg

Budget

MDF board and batten style, simple vertical battens on flat panels, one room (about 50 linear feet), paint-grade finish

Mid-Range

Raised panel or shaker-style wainscoting in pine or poplar, 2-3 rooms (about 120 linear feet), chair rail cap, professional painting

Premium

Custom hardwood raised panel wainscoting, full room installations, stain-grade finish, ornate chair rail and base cap profiles

Material Options

Material prices below are national averages; availability in Denver may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
MDF Panels and Battens	$2 - $4 per linear foot	Smooth surface, no grain to bleed through paint, consistent quality, affordable, won't warp	Can swell with moisture, heavier than solid wood, not suitable for bathrooms, can't be stained	Paint-grade board and batten or shaker-style installations in dry roomsSmooth surface, no grain to bleed through paint, consistent quality, affordable, won't warp
Pine or Poplar	$3 - $6 per linear foot	Real wood, takes paint well, can be stained (with conditioning), relatively affordable, lightweight	Pine dents easily, poplar has greenish undertones, both are soft woods prone to nicks from daily use	Mid-range installations, traditional homes, either paint or light stain finishesReal wood, takes paint well, can be stained (with conditioning), relatively affordable, lightweight
Oak or Maple	$6 - $12 per linear foot	Hard and durable, beautiful grain for stain-grade work, classic appearance, adds home value	Expensive, heavier, requires pre-drilling for nails, open grain (oak) needs filler for smooth finish	Stain-grade raised panel wainscoting, formal dining rooms, high-end home renovationsHard and durable, beautiful grain for stain-grade work, classic appearance, adds home value
PVC/Cellular PVC	$5 - $9 per linear foot	Completely waterproof, won't rot or swell, paintable, ideal for wet areas, insect-proof	More expensive than MDF, can expand with heat, limited to paint finish (can't stain), slightly different feel than wood	Bathrooms, mudrooms, laundry rooms, below-grade installations, any high-moisture environmentCompletely waterproof, won't rot or swell, paintable, ideal for wet areas, insect-proof
Pre-Made Wainscoting Kits	$8 - $15 per linear foot	Includes all components, consistent sizing, often includes chair rail and base, good for DIY	Limited style options, may not fit non-standard wall heights, premium pricing for convenience	DIY homeowners, single-room projects, anyone who wants a simplified installation processIncludes all components, consistent sizing, often includes chair rail and base, good for DIY

Other Projects in Denver

Full Kitchen Remodel

Full Bathroom Remodel

Basement Finishing

Back to national average for Wainscoting and Board and Batten Installation

Denver Estimate

Typical Range

$1,120–$5,600

vs. National Average

12% above national

Cost Multiplier

1.12x

Cost Per linear ft

$8–$28

Estimates apply Denver's 1.12x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →