Cost to Skim Coat Walls in Memphis, TN

$410–$3,280 in Memphis

18% below the national average · 0.82x cost multiplier

Expect to pay $410–$3,280 for a skim coat walls in Memphis, about 18% below the national benchmark. The Southeast region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at Memphis prices.

Cost Breakdown in Memphis

Line Item	Low	Mid	High
Materials	$82	$246	$574
Labor	$328	$902	$2,706
Permits	$0	$0	$0
Total	$410-18% vs. national avg	$1,148-18% vs. national avg	$3,280-18% vs. national avg

Budget

Single small room (100-150 sq ft) with minor surface imperfections. One or two thin coats of joint compound, light sanding, and preparation for painting. Basic contractor or skilled DIYer.

Mid-Range

Two average rooms (300-400 sq ft total). Full skim coat over existing walls to cover texture or rough surfaces. Includes two coats, sanding between coats, and primer coat for painting readiness.

Premium

Whole-floor treatment on a 1,200-1,500 sq ft home. Multiple coats on walls with significant damage, old texture, or wallpaper removal marks. Level 5 finish quality with meticulous sanding for a near-perfect surface before high-gloss paint.

Material Options

Material prices below are national averages; availability in Memphis may shift costs slightly.

Material	Cost/Unit	Pros	Cons	Best For
All-Purpose Joint Compound	$20-$35 per 5-gallon bucket	Widely available, easy to apply, sands well	Shrinks more than other compounds, may require additional coats, slower drying	General skim coating on most residential wallsWidely available, easy to apply, sands well
Topping Compound (Lightweight)	$25-$40 per 5-gallon bucket	Minimal shrinkage, very smooth finish, ideal for finish coats	Less forgiving for filling gaps, not suitable for tape embedding	Final finish coats where a glass-smooth surface is the goalMinimal shrinkage, very smooth finish, ideal for finish coats
Veneer Plaster	$30-$50 per 50-lb bag	Extremely hard and durable finish, classic plaster look, resists dings	Requires skill and experience to apply, sets quickly leaving less working time	Renovation projects aiming to match original plaster walls in older homesExtremely hard and durable finish, classic plaster look, resists dings
Setting-Type Compound (Hot Mud)	$15-$25 per 25-lb bag	Sets by chemical reaction rather than drying, can apply and recoat in 1-2 hours, very hard	Cannot be slowed once mixed, requires experience, doesn't sand as easily	Professionals who need to apply multiple coats in a single daySets by chemical reaction rather than drying, can apply and recoat in 1-2 hours, very hard
Pre-Mixed Skim Coat Compound	$35-$55 per 5-gallon bucket	Ready to use at correct consistency, consistent results	More expensive per application, shorter shelf life once opened	DIYers who want the most foolproof product without mixingReady to use at correct consistency, consistent results

Other Projects in Memphis

Full Kitchen Remodel

Full Bathroom Remodel

Roof Replacement (Asphalt Shingles)

Back to national average for Skim Coat Walls

Memphis Estimate

Typical Range

$410–$3,280

vs. National Average

18% below national

Cost Multiplier

0.82x

Estimates apply Memphis's 0.82x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →