Cost to Exterior House Painting in Jacksonville, FL

$1,638$6,825 in Jacksonville

9% below the national average · 0.91x cost multiplier

In Jacksonville, a exterior house painting runs $1,638 to $6,825 on average — about 9% below what homeowners pay nationwide. The Southeast market's labor costs account for most of the gap, with material pricing and local permitting fees adding to the spread. Use the cost table below to compare budget, mid-range, and premium options side by side.

Cost Breakdown in Jacksonville

Line ItemLowMidHigh
Cost per sq ft$1$2$5
Materials$455$1,092$2,275
Labor$1,092$2,912$5,278
Permits$0$0$0
Total$1,547-9% vs. national avg$4,095-9% vs. national avg$7,735-9% vs. national avg

Budget

Single-story home under 1,500 sq ft, basic acrylic latex paint, one coat over existing color, minimal prep

Mid-Range

Two-story home 1,500-2,500 sq ft, quality acrylic latex, two coats, primer on bare spots, full prep and caulking

Premium

Large or multi-story home, premium paint, complete scraping and sanding, primer coat, two finish coats, trim and accent colors

Material Options

Material prices below are national averages; availability in Jacksonville may shift costs slightly.

MaterialCost/UnitBest For
Acrylic Latex (Standard)$25-$40/gallonMost homes, budget to mid-range projectsEasy cleanup, low odor, flexible in temperature changes, good durability
Acrylic Latex (Premium)$50-$85/gallonLong-term homes where you want 10+ years between paint jobsSuperior adhesion, fade resistance, 10-15 year lifespan, better coverage
Elastomeric Paint$40-$70/gallonStucco, concrete block, and masonry exteriors with minor crackingBridges hairline cracks, waterproof, excellent for stucco and masonry
Oil-Based/Alkyd Paint$30-$60/gallonBare wood trim, areas needing maximum adhesion, repainting over old oil paintExtremely hard finish, excellent adhesion to bare wood, self-leveling
Exterior Stain (Semi-Transparent)$30-$55/gallonCedar, redwood, and other natural wood siding where grain is desiredShows natural wood grain, penetrates into wood, easier maintenance recoats

Other Projects in Jacksonville

Jacksonville Estimate

Typical Range

$1,638$6,825

vs. National Average

9% below national

Cost Multiplier

0.91x

Cost Per sq ft

$1–$5

Estimates apply Jacksonville's 0.91x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →