Cost to Drywall Repair in New York City, NY

$213$1,420 in New York City

42% above the national average · 1.42x cost multiplier

Homeowners in New York City typically spend $213–$1,420 on a drywall repair, about 42% above the national average. Labor rates and contractor availability in the Northeast region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.

Cost Breakdown in New York City

Line ItemLowMidHigh
Cost per repair$71$213$426
Materials$43$114$426
Labor$170$568$2,130
Permits$0$0$0
Total$213+42% vs. national avg$682+42% vs. national avg$2,556+42% vs. national avg

Budget

Small nail holes and hairline cracks, single room

Mid-Range

Fist-sized hole (3-6 inch), proper patch with backer, tape, mud, texture match

Premium

Large section replacement (2+ sq ft), texture matching across multiple repairs

Material Options

Material prices below are national averages; availability in New York City may shift costs slightly.

MaterialCost/UnitBest For
Spackle / Joint Compound (Small Holes)$5-$15 materialsNail holes, screw holes, hairline cracksEasy to apply, fast drying, paintable, DIY-friendly
Patch Kit with Self-Adhesive Mesh$10-$25 materialsMedium holes (3-6 inch) in out-of-the-way locationsEasy for 3-6 inch holes, no cutting required, good DIY option
California Patch (Drywall Scrap)$5-$15 materialsHoles 3-8 inches where a clean result is neededProfessional result, uses existing drywall, no backer board needed
Section Replacement (Cut and Replace)$50-$150 materials per sectionHoles over 8 inches, water damage, impact damageBest result for large or irregular damage, ties into studs
Spray Texture$15-$40 canDIY texture matching on orange peel or popcorn-adjacent finishesMatches orange peel and light knockdown texture well

Other Projects in New York City

New York City Estimate

Typical Range

$213$1,420

vs. National Average

42% above national

Cost Multiplier

1.42x

Cost Per repair

$71–$426

Estimates apply New York City's 1.42x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.

See national average costs →