Cost to Drywall Installation in Indianapolis, IN
$850–$4,250 in Indianapolis
15% below the national average · 0.85x cost multiplier
Homeowners in Indianapolis typically spend $850–$4,250 on a drywall installation, about 15% below the national average. Labor rates and contractor availability in the Midwest region drive much of the price difference. Permit requirements and material delivery costs also play a role. See the full tier-by-tier breakdown below before requesting bids.
Cost Breakdown in Indianapolis
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $1 | $2 | $3 |
| Materials | $425 | $765 | $1,700 |
| Labor | $595 | $1,190 | $2,975 |
| Permits | $0 | $0 | $255 |
| Total | $1,020-15% vs. national avg | $1,955-15% vs. national avg | $4,930-15% vs. national avg |
Budget
New drywall in one room, standard 1/2-inch, basic tape and mud
Mid-Range
Multi-room drywall, includes taping, mudding, and texture coat
Premium
Full basement or addition finish, moisture-resistant board where needed, level 5 finish
Material Options
Material prices below are national averages; availability in Indianapolis may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard 1/2-Inch Drywall | $0.40-$0.60/sq ft materials | Interior walls and ceilings in living spacesMost common, widely available, cost-effective, works for most walls |
| Moisture-Resistant (Green Board) | $0.60-$0.80/sq ft materials | Bathroom walls (non-wet areas), laundry rooms, basementsHandles humidity better than standard, good for bathrooms |
| Mold-Resistant (Purple Board) | $0.80-$1.00/sq ft materials | Basements, bathrooms, any area with chronic moisture concernsBest moisture and mold resistance without cement board |
| 5/8-Inch Fire-Rated (Type X) | $0.70-$0.90/sq ft materials | Garage walls, between dwelling units, required by local code1-hour fire rating, better sound dampening, required by code in some locations |
| Cement Board | $1.00-$1.80/sq ft materials | Shower surrounds, tub decks, any area that gets wet (not drywall at all here)Waterproof, required behind tile in wet areas |
Other Projects in Indianapolis
Indianapolis Estimate
Typical Range
$850–$4,250
vs. National Average
15% below national
Cost Multiplier
0.85x
Cost Per sq ft
$1–$3
Estimates apply Indianapolis's 0.85x regional cost multiplier to national averages. Actual bids vary by contractor, project scope, and timing.
See national average costs →