Cost to Drywall Installation in El Paso, TX (2026)
If you’re budgeting a drywall installation in El Paso, most projects run $796-$3,980, 20% below the $2,200 national average. What moves that number most is usually one thing: Finish Level. On its own it can swing the cost by $0.50-$2/sq ft, so that’s the decision to slow down on before you sweat the smaller stuff.
Easiest place to save: Separate the work: hang the boards yourself and hire only for tape and finish - saves $300-$700 on a typical room.
In the Southwest (where El Paso sits): Lower labor costs, competitive contractor market.
$796-$3,980 in El Paso
20% below the national average · 0.80x cost multiplier
Expect to pay $796-$3,980 for a drywall installation in El Paso, about 20% below the national benchmark. The Southwest region's contractor market and material costs account for most of this difference. The detailed breakdown below shows how budget, mid-range, and premium projects compare at El Paso prices.
Cost Breakdown in El Paso
| Line Item | Low | Mid | High |
|---|---|---|---|
| Cost per sq ft | $1 | $2 | $3 |
| Materials | $470 | $846 | $1,880 |
| Labor | $491 | $981 | $2,453 |
| Permits | $0 | $0 | $282 |
| Total | $961-20% vs. national avg | $1,827-21% vs. national avg | $4,615-20% vs. national avg |
Budget
New drywall in one room, standard 1/2-inch, basic tape and mud
Mid-Range
Multi-room drywall, includes taping, mudding, and texture coat
Premium
Full basement or addition finish, moisture-resistant board where needed, level 5 finish
Material Options
Material prices below are national averages; availability in El Paso may shift costs slightly.
| Material | Cost/Unit | Best For |
|---|---|---|
| Standard 1/2-Inch Drywall | $0.40-$0.60/sq ft materials | Interior walls and ceilings in living spacesMost common, widely available, cost-effective, works for most walls |
| Moisture-Resistant (Green Board) | $0.60-$0.80/sq ft materials | Bathroom walls (non-wet areas), laundry rooms, basementsHandles humidity better than standard, good for bathrooms |
| Mold-Resistant (Purple Board) | $0.80-$1.00/sq ft materials | Basements, bathrooms, any area with chronic moisture concernsBest moisture and mold resistance without cement board |
| 5/8-Inch Fire-Rated (Type X) | $0.70-$0.90/sq ft materials | Garage walls, between dwelling units, required by local code1-hour fire rating, better sound dampening, required by code in some locations |
| Cement Board | $1.00-$1.80/sq ft materials | Shower surrounds, tub decks, any area that gets wet (not drywall at all here)Waterproof, required behind tile in wet areas |
Other Projects in El Paso
El Paso Estimate
Typical Range
$796-$3,980
vs. National Average
20% below national
Cost Multiplier
0.80x
Cost Per sq ft
$1-$3
This 0.80x estimate prices El Paso labor from BLS Occupational Employment and Wage Statistics (May 2025) and applies a lighter regional adjustment to materials and permits, which vary less by metro than labor does. Actual bids vary by contractor, project scope, and timing.
See national average costs →